OCXO134-10 OSCILLATOR Datasheet

OCXO134-10 Datasheet, PDF, Equivalent


Part Number

OCXO134-10

Description

CRYSTAL OSCILLATOR

Manufacture

ISOTEMP

Total Page 4 Pages
Datasheet
Download OCXO134-10 Datasheet


OCXO134-10
OCXO 134-10
P.O. BOX 3389
CHARLOTTESVILLE, VIRGINIA 22903
PHONE: (804) 295-3101
FAX: (804) 977-1849
CRYSTAL
OSCILLATOR
SPECIFICATION
This specification defines the operating characteristics of
an ovenized crystal oscillator. Long term stability is
assured through use of premium components.
REV.
DESCRIPTION OF REVISION
REQ. DWN.
BY BY
DATE
NONE
ADB TST 02-06-92
A Updated form, 2.5. was ±5x10-10, 4.3.a. was ADB TST 10-30-92
±4 mV, 6.1.a. was +2.4 VDC, 6.2.a. was
+0.4 VDC
B 5.3.a. was < 2.4 Watts (1.8 Watts typical) BTB TST 04-29-94
5.3.b. was < 4.6 Watts (3.5 Watts typical)
ISOTEMP RESEARCH INC. CODE ID. PART NO.
CHARLOTTESVILLE, VA.
USA 31785 OCXO 134-10
PAGE OF TOTAL DWG. NO. REV.
1 3 114-501 B

OCXO134-10
OCXO 134-10
1. OUTPUT
1.1. Frequency
1.2. Wave form
1.3. Level
1.4. Load
1.5. Harmonics
1.6. Spurious
10.000 MHz
Sine wave
2 Vp-p ±10% into 50
50 ±5%
< -25 dBc
< -60 dBc
2. STABILITY
2.1. Ambient
< ±5x10-9 from -30°C to +60°C
(referenced to +25°C)
2.2. Aging
a. Daily
i. After 30 days
< ±1x10-9
ii. After 90 days
< ±5x10-10
b. Yearly
< ±1.5x10-7
c. 10 years
< ±4x10-7
2.3. Voltage
< ±5x10-10/±2% change
2.4. Short term
< 1x10-10/second
root Allan variance
2.5. Load
< ±1x10-9/±5% change
2.6. Warm-up @ -30°C referenced to frequency @ 5 hours
a. 30 minutes
< ±5x10-8
b. 60 minutes
< ±1x10-8
2.7. Phase noise
a. @ 10 Hz
< -105 dBc
b. @ 100 Hz
< -125 dBc
c. @ 1 kHz
< -140 dBc
3. ELECTRICAL FREQUENCY ADJUSTMENT
3.1. Range
> ±0.45 PPM
< ±1.2 PPM (At time of shipment)
(Referenced to nominal frequency)
3.2. Control
0 VDC to Vref (0 VDC to +8 VDC ) or
a 10 kpotentiometer connected
between pins 2 and 4 with wiper
connected to pin 3.
3.3. Slope
Positive
3.4. Center
Vref/2 ±10% of Vref
(+4 VDC to +0.8 VDC)
(Nominal frequency at time of shipment)
ISOTEMP RESEARCH INC. CODE ID. PART NO.
CHARLOTTESVILLE, VA.
USA 31785 OCXO 134-10
PAGE OF TOTAL DWG. NO. REV.
2 3 114-501 B


Features OCXO 134-10 P.O. BOX 3389 CHARLOTTESVILL E, VIRGINIA 22903 PHONE: (804) 295-3101 FAX: (804) 977-1849 CRYSTAL OSCILLATOR SPECIFICATION This specification defin es the operating characteristics of an ovenized crystal oscillator. Long term stability is assured through use of pre mium components. REV. DESCRIPTION OF REVISION REQ. DWN. BY BY DATE NONE ADB TST 02-06-92 A Updated form, 2.5. was ±5x10-10, 4.3.a. was ADB TST 10-30 -92 ±4 mV, 6.1.a. was +2.4 VDC, 6.2.a. was +0.4 VDC B 5.3.a. was < 2.4 Watts (1.8 Watts typical) BTB TST 04-29-94 5 .3.b. was < 4.6 Watts (3.5 Watts typica l) ISOTEMP RESEARCH INC. CODE ID. PART NO. CHARLOTTESVILLE, VA. USA 31785 OCX O 134-10 PAGE OF TOTAL DWG. NO. REV. 1 3 114-501 B OCXO 134-10 1. OUTPUT 1. 1. Frequency 1.2. Wave form 1.3. Level 1.4. Load 1.5. Harmonics 1.6. Spurious 10.000 MHz Sine wave 2 Vp-p ±10% into 50 Ω 50 Ω ±5% < -25 dBc < -60 dBc 2. STABILITY 2.1. Ambient < ±5x10- 9 from -30°C to +60°C (referenced to +25°C) 2.2. Aging a..
Keywords OCXO134-10, datasheet, pdf, ISOTEMP, CRYSTAL, OSCILLATOR, CXO134-10, XO134-10, O134-10, OCXO134-1, OCXO134-, OCXO134, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)