Document
NIADHDWHNF(OCXO 131-1006)
www.isotemp.com www.taitien.com
CRYSTAL OSCILLATOR SPECIFICATION
This specification defines the operating characteristics of an ovenized crystal oscillator. Long term stability is assured through use of premium components.
REV.
DESCRIPTION OF REVISION
-
- Updated to actual performance
A 4.2. was 300 mA
DWN. BY APV. BY
DATE
TST TST 12-28-2008
SZ TST 01-17-2011
TST TST 08-11-2011
1. OUTPUT(PIN = "R.F. OUTPUT") 1.1. Frequency 1.2. Initial Accuracy a. @ Temperature b. After time on power c. Within time period following date code d. @ VCO Input voltage 1.3. Waveform 1.4. Level 1.5. Load 1.6. Harmonics 1.7. Spurious
2. FREQUENCY STABILITY 2.1. Ambient
2.2. Aging a. At time of shipment b. After indefinite storage i. Daily ii. Yearly iii.10 years
2.3. Voltage 2.4. Load 2.5. Warm-up
2.6. Phase Noise a. @ 10 Hz b. @ 100 Hz c. @ 1 kHz d. @ 10 kHz e. @ 100 kHz
100.000000 MHz < ±2x10-7 +25 ±1°C 30 ±5 minutes ≤ 90 days
+4.0 ±0.001 V Sine wave +9 ±2 dBm .