CRYSTAL OSCILLATOR
OCXO 143-1001
www.isotemp.com www.taitien.com
CRYSTAL OSCILLATOR SPECIFICATION
This specification defines the operating...
Description
OCXO 143-1001
www.isotemp.com www.taitien.com
CRYSTAL OSCILLATOR SPECIFICATION
This specification defines the operating characteristics of an ovenized crystal oscillator. Long term stability is assured through use of premium components.
REV. -
DESCRIPTION OF REVISION
DWN. BY APV. BY
DATE
JTL TST 08-15-2011
1. OUTPUT(PIN = "R.F. OUTPUT") 1.1. Frequency 1.2. Initial Accuracy a. @ Temperature b. After time on power c. Within time period following date code d. @ VCO Input voltage 1.3. Waveform 1.4. Level a. "1" level b. "0" level 1.5. Load 1.6. Duty cycle 1.7. Spurious
2. FREQUENCY STABILITY 2.1. Ambient
2.2. Aging a. At time of shipment b. After indefinite storage i. Daily ii. Yearly iii.10 years
2.3. Voltage 2.4. Warm-up
2.5. Phase Noise a. @ 10 Hz b. @ 100 Hz c. @ 1 kHz
10.000000 MHz < ±1x10-7 +25 ±1C 30 ±5 minutes 90 days
+2.0 ±0.001 V Rectangular HCMOS > Vcc - 0.6 V < +0.4 V 15pF 40% to 60%@ +2.5 V < -60 dBc
< ±5x10-9, 0C to +70C (referenced to +25C)
< ±5...
Similar Datasheet