SP6038
High Performance Synchronous Rectifying Converter
DESCRIPTION SP6038 is a high performance and tightly integrate...
SP6038
High Performance Synchronous Rectifying Converter
DESCRIPTION SP6038 is a high performance and tightly integrated secondary side synchronous rectifier for switching mode power supply system. It combines a much lower voltage drop N-channel MOSFET to emulate the traditional diode rectifier at the secondary side of Flyback converter, The fundamental of SP6038 synchronous rectifier (SR) driver IC is based on our U.S. patented methods that utilize the principle of “prediction” logic circuit. The IC deliberates previous cycle timing to control the SR in present cycle by “predictive” algorithm that makes adjustments to the turn-off time, in order to achieve maximum efficiency and avoid cross-conduction at the same time. The SP6038 is capable to adapt in almost all existing Resonance converters with few adjustments considered necessary.
APPLICATIONS Switching Mode Power Supply
(CCM&DCM&QR)
Storage area network power supplies
Telecommunication converters
Embedded systems
Industrial & commercial systems using high current processors
Power converters to meet Lot 6 requirement
FEATURES
PIN CONFIGURATION (SOP-8)
Offers efficiency improvement over
Schottky Diode (depends on drive configuration of the SR).
Low Standby Power to meet DOE Lot 6 requirement.
Secondary-side synchronous rectifier optimized for output system.
Build-in 100V SR MOSFET with low Rdson
Operating frequency up to 300 KHz.
Synchronize to transformer secondary voltage waveform.
Interna...