Universal High Brightness LED Driver
SP6801
Universal High Brightness LED Driver
DESCRIPTION The SP6801 is a PWM high efficiency LED driver. It operates in ...
Description
SP6801
Universal High Brightness LED Driver
DESCRIPTION The SP6801 is a PWM high efficiency LED driver. It operates in wide range input voltage from 10V up to 600V. The device drives an external MOSFET at a fixed frequency. The frequency is programmable up to 300KHz with a single resistor. The dimming control for SP6801 can be either PWM input or linear input. The LED string is driven at a constant current without the need for loop compensation. SP6801 requires only few external components to achieve constant LED current making it ideas for low cost LED driver. The SP6801 is available in SOP-8 package.
APPLICATIONS AC/DC or DC/DC LED driver applications Backlighting for flat panel displays General purpose constant current source Automotive Chargers
FEATURES >90% efficiency 10V to 600V DC input range Constant current LED driver Linear and PWM dimming capability Internal thermal overload protection
PIN CONFIGURATION(SOP-8) PART MARKING
2020/07/08 Ver 3
Page 1
SP6801
Universal High Brightness LED Driver
TYPICAL APPLCATION CIRCUIT
PIN DESCRIPTION
Pin
Symbol
Description
1
VIN Supply Voltage Input
2
CS
Current sense. This pin senses the voltage across a resistor, to control PWM output. This pin also provides current amplitude information for current-mode control
3
GND Ground
4
Gate Gate driver output to drive the external MOSFET
5
Dim Dimming Control
6
Vdd Power supply pin for internal circuits
7
Ld Linear dimming by changing the curren...
Similar Datasheet