Document
74LVC1G04
Single inverter
Rev. 16 — 9 February 2022
Product data sheet
1. General description
The 74LVC1G04 is a single inverter. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.
2. Features and benefits
• Wide supply voltage range from 1.65 V to 5.5 V • Overvoltage tolerant inputs to 5.5 V • High noise immunity • CMOS low power dissipation • IOFF circuitry provides partial Power-down mode operation • ±24 mA output drive (VCC = 3.0 V) • Latch-up performance exceeds 250 mA • Direct interface with TTL levels • Complies with JEDEC standard:
• JESD8-7 (1.65 V to 1.95 V) • JESD8-5 (2.3 V to 2.7 V) • JESD8C (2.7 V to 3.6 V) • JESD36 (4.5 V to 5.5 V) • ESD protection: • HBM: ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V • MM: JESD22-A115-A exceeds 200 V • Multiple package options • Specified from -40 °C to +85 °C and -40 °C to +125 °C.
Nexperia
74LVC1G04
Single inverter
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range
74LVC1G04GW -40 °C to +125 °C
Name TSSOP5
74LVC1G04GV 74LVC1G04GM
-40 °C to +125 °C -40 °C to +125 °C
SC-74A XSON6
74LVC1G04GN -40 °C to +125 °C XSON6
74LVC1G04GS -40 °C to +125 °C XSON6
74LVC1G04GX -40 °C to +125 °C X2SON5
74LVC1G04GX4 -40 °C to +125 °C X2SON4
Description
Version
plastic thin shrink small outline package; 5 leads; body width 1.25 mm
SOT353-1
plastic surface-mounted package; 5 leads
SOT753
plastic extremely thin small outline package; no leads; SOT886 6 terminals; body 1 × 1.45 × 0.5 mm
extremely thin small outline package; no leads; 6 terminals; body 0.9 × 1.0 × 0.35 mm
SOT1115
extremely thin small outline package; no leads; 6 terminals; body 1.0 × 1.0 × 0.35 mm
SOT1202
plastic thermal enhanced extremely thin small outline package; no leads; 5 terminals; body 0.8 × 0.8 × 0.32 mm
SOT1226-3
plastic thermal enhanced extremely thin small outline package; no leads; 4 terminals; body 0.6 × 0.6 × 0.32 mm
SOT1269-2
4. Marking
Table 2. Marking Type number 74LVC1G04GW 74LVC1G04GV 74LVC1G04GM 74LVC1G04GN 74LVC1G04GS 74LVC1G04GX 74LVC1G04GX4
Marking code[1] VC V04 VC VC VC VC VC
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5. Functional diagram
A
Y
mna108
Fig. 1. Logic symbol
1
mna109
Fig. 2. IEC logic symbol
A
Y
mna110
Fig. 3. Logic diagram
74LVC1G04
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 16 — 9 February 2022
© Nexperia B.V. 2022. All rights reserved
2 / 18
Nexperia
6. Pinning information
74LVC1G04
Single inverter
6.1. Pinning
74LVC1G04
n.c. 1 A2
5 VCC
GND 3
4Y
001aab618
Fig. 4. Pin configuration SOT353-1 (TSSOP5) and SOT753 (SC-74A)
74LVC1G04
n.c. 1
3 GND
5 VCC
A2
4Y
aaa-003020 Transparent top view
Fig. 6. Pin configuration SOT1226-3 (X2SON5)
74LVC1G04
n.c. 1
6 VCC
A2
5 n.c.
GND 3
4Y
001aaf050 Transparent top view
Fig. 5. Pin configuration SOT886, SOT1115 and SOT1202 (XSON6)
74LVC1G04
A1
4 VCC
GND 2
3Y
aaa-028400
Transparent top view
Fig. 7. Pin configuration SOT1269-2 (X2SON4)
6.2. Pin description
Table 3. Pin description
Symbol
Pin
TSSOP5, SC-74A and X2SON5
n.c.
1
A
2
GND
3
Y
4
VCC
5
7. Functional description
Table 4. Function table H = HIGH voltage level; L = LOW voltage level Input A L H
XSON6 1, 5 2 3 4 6
Output Y H L
X2SON4 1 2 3 4
Description
not connected data input ground (0 V) data output supply voltage
74LVC1G04
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 16 — 9 February 2022
© Nexperia B.V. 2022. All rights reserved
3 / 18
Nexperia
74LVC1G04
Single inverter
8. Limiting values
Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
Max Unit
VCC
supply voltage
IIK
input clamping current
VI
input voltage
IOK
output clamping current
VO
output voltage
IO ICC IGND Tstg Ptot
output current supply current ground current storage temperature total power dissipation
VI < 0 V
VO > VCC or VO < 0 V Active mode Power-down mode; VCC = 0 V VO = 0 to VCC
Tamb = -40 °C to +125 °C TSSOP5, SC-74A, XSON6 and X2SON5 package
-0.5 -50 [1] -0.5
[1] -0.5 [1] -0.5
-100 -65
[2]
-
+6.5 V
-
mA
+6.5 V
±50 mA
VCC + 0.5 V
+6.5 V
±50 mA
100 mA
-
mA
+150 °C
250 mW
X2SON4 package
[3]
-
150 mW
[1] The input and output voltage ratings may be exceeded if the input and ou.