1-Megabit (128K x 8) Single 2.7-volt Battery-Voltage Flash Memory
AT49(H)BV/(H)LV01
Features
• Single Supply Voltage, Range 2.7V to 3.6V • Single Supply for Read and Write • Fast Read A...
Description
AT49(H)BV/(H)LV01
Features
Single Supply Voltage, Range 2.7V to 3.6V Single Supply for Read and Write Fast Read Access Time - 55 ns Internal Program Control and Timer 8K bytes Boot Block With Lockout Fast Erase Cycle Time - 10 seconds Byte By Byte Programming - 30 µs/Byte typical Hardware Data Protection DATA Polling For End Of Program Detection Low Power Dissipation
– 25 mA Active Current – 50 µA CMOS Standby Current Typical 10,000 Write Cycles
Description
The AT49(H)BV010 and the AT49(H)LV010 are 3-volt-only, 1-megabit Flash memories organized as 131,072 words of 8 bits each. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the devices offer access times to 55 ns with power dissipation of just 90 mW over the commercial temperature range. When the devices are deselected, the CMOS standby current is less than 50 µA.
To allow for simple in-system reprogrammability, the AT49(H)BV/(H)LV010 does not
require high input...
Similar Datasheet