G7SA

New Product Relays with Forcibly Guided Contacts G7SA Compact, Slim Relays Conforming to EN Standards Additional Push-In Plus terminal sockets are used to save wiring work in comparison with traditional screw terminals. (Wiring time is reduced by 60%* in comparison with traditional screw terminals.) Relays with forcibly guided contacts (EN/IEC 61810-3, Certified by VDE). Supports the CE marking of machinery (Machinery Directive). Helps avoid hazardous machine status when used as part of an interlocking circuit. Four-pole and six-pole Relays are available. The Relay’s terminal arrangement simplifies PWB pattern design. Reinforced insulation between inputs and outputs. Reinforced insulation between some poles of different polarity. * According to OMRON actual measurement data Note: Sockets are sold separately. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Be sure to read the Safety Precautions on page 13. Model Number Structure Model Number Legend Main unit Relays with forcibly guided contacts G7SA-@A@B@ ⎯1 ⎯2 ⎯3 Specify the power supply voltage (coil rated voltage) when ordering. 1. NO Contact Poles 2: DPST-NO 3: 3PST-NO 4: 4PST-NO 5: 5PST-NO 2. NC Contact Poles 1: SPST-NC 2: DPST-NC 3: 3PST-NC Options (order separately) Sockets P7SA-@@-@-@@ ⎯⎯1⎯⎯ ⎯2 ⎯3 ⎯4 ⎯5 ⎯6 3. Coil Rated Voltage (V) 12 VDC 18 VDC 21 VDC 24 VDC 48 VDC 110 VDC Relays use PCB terminals. This allows for mounting o...