MBRF10150CT RECTIFIER Datasheet

MBRF10150CT Datasheet PDF, Equivalent


Part Number

MBRF10150CT

Description

10A SCHOTTKY BARRIER RECTIFIER

Manufacture

Diodes

Total Page 4 Pages
Datasheet
Download MBRF10150CT Datasheet


MBRF10150CT
MBR10150CT / MBRF10150CT
Green 10A SCHOTTKY BARRIER RECTIFIER
Product Summary
MBR10150CT / MBRF10150CT (Per Leg)
VRRM (V)
IO (A)
VF (MAX) (V)
@ +25°C
150 5
0.89
IR (MAX) (mA)
@ +25°C
0.05
Features and Benefits
Guard Ring Die Construction for Transient Protection.
High Surge Current Capability.
Low Forward Voltage Drop.
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
Description and Applications
This Schottky Barrier Rectifier is designed to meet the general
requirements of commercial applications. It is ideally suited for use
as a:
Polarity Protection Diode
Re-Circulating Diode
Switching Diode
Mechanical Data
Case: TO-220AB, ITO-220AB
Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish - Matte Tin Annealed over Copper Leadframe.
Solderable per MIL-STD-202, Method 208
Polarity: See Below
Weight: TO-220AB – 1.95 grams (Approximate)
ITO-220AB – 1.69 grams (Approximate)
TO-220AB
Top View
TO-220AB
Bottom View
ITO-220AB
Top View
ITO-220AB
Bottom View
Package Pin Out
Configuration
Ordering Information (Note 4)
Notes:
Part Number
MBR10150CT-LJ
MBRF10150CT-LJ
Case
TO-220AB (Type C)
ITO-220AB (TO220F-3)
Packaging
50 pieces/tube
50 pieces/tube
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
MBR10150CT = Product Type Marking Code
AB = Foundry and Assembly Code
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 15 = 2015)
WW = Week (01 - 53)
MBRF10150CT = Product Type Marking Code
AB = Foundry and Assembly Code
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 15 = 2015)
WW = Week (01 - 53)
MBR10150CT / MBRF10150CT
Document number: DS35379 Rev. 7 - 2
1 of 4
www.diodes.com
April 2015
© Diodes Incorporated

MBRF10150CT
MBR10150CT / MBRF10150CT
Maximum Ratings (Per Leg) (@TA = +25°C, unless otherwise specified.)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Output Current
(Per Leg)
(Total)
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
VRRM
VRWM
VRM
IO
IFSM
Value
150
5
10
100
Unit
V
A
A
Thermal Characteristics (Per Leg)
Characteristic
Typical Thermal Resistance, Junction to Case (Note 5)
Package = TO-220AB
Package = ITO-220AB
Typical Thermal Resistance, Junction to Ambient (Note 5)
Package = TO-220AB
Package = ITO-220AB
Operating and Storage Temperature Range
Symbol
RθJC
RθJA
TJ, TSTG
Value
4
7
15
25
-55 to +175
Unit
°C/W
°C/W
°C
Electrical Characteristics (Per Leg) (@TA = +25°C, unless otherwise specified.)
Characteristic
Forward Voltage Drop
Leakage Current (Note 6)
Symbol
VF
IR
Min
Typ
0.83
Max
0.89
0.81
0.05
10
Unit
V
mA
Test Condition
IF = 5A, TJ = +25°C
IF = 5A, TJ = +125°C
VR = 150V, TJ = +25°C
VR = 150V, TJ = +125°C
Notes:
5. Device mounted on heat sink (45mm x 20mm x12mm), with minimum recommended pad layout per http://www.diodes.com.
6. Short duration pulse test used to minimize self-heating effect.
10.0
8.0
TJ = 175°C
6.0
4.0
2.0
0.0
0
5 10 15
IF(AV) AVERAGE FORWARD CURRENT (A)
Figure 1 Forward Power Dissipation
100
10
TA = 175°C
1 TA = 150°C
0.1 TA = 125°C
0.01
0.001
TA = 85°C
TA = 25°C
TA = -55°C
0.0001
0
0.2 0.4 0.6 0.8 1.0 1.2
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Figure 2 Typical Forward Characteristics
MBR10150CT / MBRF10150CT
Document number: DS35379 Rev. 7 - 2
2 of 4
www.diodes.com
April 2015
© Diodes Incorporated


Features MBR10150CT / MBRF10150CT Green 10A SCHOT TKY BARRIER RECTIFIER Product Summary MBR10150CT / MBRF10150CT (Per Leg) VR RM (V) IO (A) VF (MAX) (V) @ +25°C 150 5 0.89 IR (MAX) (mA) @ +25°C 0.0 5 Features and Benefits • Guard Ring Die Construction for Transient Protect ion. • High Surge Current Capability. • Low Forward Voltage Drop. • Lead -Free Finish; RoHS Compliant (Notes 1 & 2) • Halogen and Antimony Free. “G reen” Device (Note 3) • Qualified t o AEC-Q101 Standards for High Reliabili ty Description and Applications This S chottky Barrier Rectifier is designed t o meet the general requirements of comm ercial applications. It is ideally suit ed for use as a: • Polarity Protectio n Diode • Re-Circulating Diode • Sw itching Diode Mechanical Data • Case : TO-220AB, ITO-220AB • Case Material : Molded Plastic, “Green” Molding C ompound. UL Flammability Classification Rating 94V-0 • Moisture Sensitivity: Level 1 per J-STD-020 • Terminals: Finish - Matte Tin Anneal.
Keywords MBRF10150CT, datasheet, pdf, Diodes, 10A, SCHOTTKY, BARRIER, RECTIFIER, BRF10150CT, RF10150CT, F10150CT, MBRF10150C, MBRF10150, MBRF1015, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)