Balun. B0430J50100A00 Datasheet

B0430J50100A00 Datasheet PDF


Part

B0430J50100A00

Description

Ultra Low Profile 0805 Balun

Manufacture

Anaren

Page 4 Pages
Datasheet
Download B0430J50100A00 Datasheet


B0430J50100A00 Datasheet
Model B0430J50100A00
Rev E
Ultra Low Profile 0805 Balun
50Ω to 100Ω Balanced
Description
The B0430J50100A00 is a low cost, low profile sub-miniature unbalanced to
balanced transformer designed specifically for differential inputs and output
locations on next generation A to D and D to A Converter IC’s in an easy to use
surface mount package, covering 400 MHz–3000 MHz. The B0430J50100A00 is
ideal for high volume manufacturing and delivers higher performance than traditional
wire wound baluns. The B0430J50100A00 has an unbalanced port impedance of
50and a 100balanced port impedance. This transformation enables single
ended signals to be applied to differential ports. The output ports have equal
amplitude (-3dB) with 180 degree phase differential. The B0430J50100A00 is
available on tape and reel for pick and place high volume manufacturing.
Note that for optimal performance, the B0430J50100A00 should be used with a 10
pF series capacitor on the unbalanced port as shown in p. 2 & 3.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
400 – 3000 MHz
0.7mm Height Profile
50 Ohm to 2 x 50 Ohm
Low Insertion Loss
Designed for A-D and D-A
Converters
Surface Mountable
Tape & Reel
Non-conductive Surface
RoHS Compliant
Parameter
Frequency
Unbalanced Port Impedance
Balanced Port Impedance
Return Loss
Insertion Loss*
Amplitude Balance
Phase Balance
CMRR
Power Handling
Min.
400
8.4
Typ.
50
100
9.9
3.4
0.7
7
25
Max
3000
4.0
1.4
12
1
Unit
MHz
dB
dB
dB
Degrees
dB
Watts
Operating Temperature
-55
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
+85 ºC
TOP VIEW (Near Side)
2.04±0.10
SIDE VIEW
0.70±0.05
4x 0.37
BOTTOM VIEW (Far Side)
12
3
2x 0.15
1.29±0.10
6x 0.98
6x
0.22
Orientation Marker
Denotes Pin Location
Orientation Marker
654
Denotes Pin Location 4x 0.65
6x
0.30
Mechanical Outline
-Dimensions are in Millimeters
-Tolerences are Non-Cumulative
Pin Designation
1 GND
2 Unbalanced Port
3 GND
4 Balanced Port
5 NC
6 Balanced Port
Visit us at
www.Anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282

B0430J50100A00 Datasheet
Model B0430J50100A00
Rev E
Typical Performance: 300 MHz. to 3100 MHz. with an external 10 pF capacitor
Unbalanced Port 50
Balanced Port 50Ω Balanced Port 50Ω
Schematic of BD0430J50100A00 with 10 pF capacitor on
unbalanced port (pin #2)
0
-3
-6
-9
-12
-15
-18
-21
-24
-27
-30
-33
-36
Return Loss - Input
Frequency [MHz]
Insertion Loss
0
-0.3
-0.6
-0.9
-1.2
-1.5
-1.8
-2.1
-2.4
-2.7
-3
-3.3
-3.6
Frequency [MHz]
Phase Balance
20
15
10
5
0
-5
-10
-15
-20
Frequency [MHz]
Amplitude Balance
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
Frequency [MHz]
CM RR
0
-3
-6
-9
-12
-15
-18
-21
-24
-27
-30
-33
-36
Frequency [MHz]
Visit us at
www.Anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282


Features Datasheet pdf Model B0430J50100A00 Rev E Ultra Low Pro file 0805 Balun 50Ω to 100Ω Balance d Description The B0430J50100A00 is a low cost, low profile sub-miniature unb alanced to balanced transformer designe d specifically for differential inputs and output locations on next generation A to D and D to A Converter IC’s in an easy to use surface mount package, c overing 400 MHz–3000 MHz. The B0430J5 0100A00 is ideal for high volume manufa cturing and delivers higher performance than traditional wire wound baluns. Th e B0430J50100A00 has an unbalanced port impedance of 50Ω and a 100Ω balanc ed port impedance. This transformation enables single ended signals to be appl ied to differential ports. The output p orts have equal amplitude (-3dB) with 1 80 degree phase differential. The B0430 J50100A00 is available on tape and reel for pick and place high volume manufac turing. Note that for optimal performan ce, the B0430J50100A00 should be used w ith a 10 pF series capacitor on the unbalanced port as shown in.
Keywords B0430J50100A00, datasheet, pdf, Anaren, Ultra, Low, Profile, 0805, Balun, 0430J50100A00, 430J50100A00, 30J50100A00, B0430J50100A0, B0430J50100A, B0430J50100, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)