A1140, A1142, and A1143
Sensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches
Features and Benefits
▪ Cho...
A1140, A1142, and A1143
Sensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches
Features and Benefits
▪ Chopper stabilization ▫ Low switchpoint drift over operating temperature range ▫ Low sensitivity to stress
▪ Factory programmed at end-of-line for optimized switchpoints
▪ On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▫ On-board voltage
regulator ▫ 3.5 to 24 V operation
Packages: 3 pin SOT23W (suffix LH), and 3 pin SIP (suffix UA)
Description
TheA1140, A1142, andA1143 devices are sensitive, two-wire, unipolar, Hall effect switches that are factory-programmed at end-of-line to optimize magnetic switchpoint accuracy. These devices use a high frequency chopper-stabilization technique, produced using the Allegro advanced BiCMOS wafer fabrication process, to achieve magnetic stability and to eliminate offset inherent in single-element devices exposed to harsh application environments.
Commonly found in a number of automotive ...