High Frequency Full Bridge FET Driver
DATASHEET
HIP4080A
80V/2.5A Peak, High Frequency Full Bridge FET Driver
FN3658 Rev.8.00 Dec 11, 2019
The HIP4080A is ...
Description
DATASHEET
HIP4080A
80V/2.5A Peak, High Frequency Full Bridge FET Driver
FN3658 Rev.8.00 Dec 11, 2019
The HIP4080A is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4080A includes an input comparator, used to facilitate the “hysteresis” and PWM modes of operation. Its HEN (high enable) lead can force current to freewheel in the bottom two external power MOSFETs, maintaining the upper power MOSFETs off. Since it can switch at frequencies up to 1MHz, the HIP4080A is well suited for driving Voice Coil Motors, switching power amplifiers and power supplies.
HIP4080A can also drive medium voltage brush motors, and two HIP4080As can be used to drive high performance stepper motors, since the short minimum “on-time” can provide fine micro-stepping capability.
Short propagation delays of approximately 55ns maximize control loop crossover frequencies and dead-times which can be adjusted to near zero to minimize distortion, resulting in precise control of the driven load.
The similar HIP4081A IC allows independent control of all 4 FETs in a Full Bridge configuration.
The Application Note for the HIP4080A is AN9404.
Ordering Information
PART NUMBER
TEMPERATURE
PACKAGE
PKG.
RANGE (°C) (RoHS Compliant) DWG. #
HIP4080AIPZ (Note 1)
-40 to +85
20 Ld PDIP
E20.3
HIP4080AIBZ (Note 1)
-40 to +85
20 Ld SOIC
M20.3
NOTES:
1. Intersil Pb-Free products employ special Pb-free material sets; molding compou...
Similar Datasheet