Document
ISL28166
NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT
contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc
39µA Micropower Rail-to-Rail Input-Output Low Input Bias Current (RRIO) Op Amp
DATASHEET
FN6155 Rev 5.00 January 16, 2014
The ISL28166 is a micropower precision operational amplifier optimized for single supply operation at 5V and can operate down to 2.4V.
This device features an Input Range Enhancement Circuit (IREC), which enables it to maintain CMRR performance for input voltages greater than the positive supply. The input signal is capable of swinging 0.5V above a 5.0V supply (0.25 for a 2.5V supply) and to within 10mV from ground. The output operation is rail-to-rail.
The 1/f corner of the voltage noise spectrum is at 1kHz. This results in low frequency noise performance, which can only be found on device with an order of magnitude higher than the supply current.
The ISL28166 can be operated from one lithium cell or two Ni-Cd batte.