SMB10J30CA

SMB10J5.0(C)A THRU SMB10J120(C)A E480232 Features Glass Passivated Chip 1000W Peak Pulse Power Capability with a 10/1000 us Waveform, Repetitive Rate(dutycycle):0.01% Low Inductance For Bidirectional Devices Add “C” To The Suffix of The Part Number: i.e.SMB10J5.0CA for 5% Tolerance Halogen Free Available Upon Request By Adding Suffix "-HF" Moisture Sensitivity Level 1 Epoxy Meets UL 94 V-0 Flammability Rating Lead Free Finish/RoHS Compliant (Note1) ("P" Suffix Designates RoHS Compliant. See Ordering Information) Mechanical Data Terminals: Solderable Per MIL-STD-750, Method 2026 Polarity: Color Band Denotes Positive End (cathode) Except Bidirectiona Maximum Ratings Operating Junction Temperature Range: -55°C to +150°C Storage Temperature Range: -55°C to +150°C Electrical Characteristics @ 25°C Unless Otherwise Specified Peak Pulse Power Surge Current on IPP 10/1000μs Waveform See the Table Note 2 Peak Pulse Power Dissipation PPP 1000W Note 2 Power Dissipationon infinite heat sink PD 5.0W TL = 75°C Peak forward surge current IFSM 100A Note 3 Maximum instantaneous forward voltage at 25A for VF unidirectional only 3.5V/5.0V Note 4 Notes: 1. High Temperature Solder Exemption Applied, see EU Directive Annex 7a. 2. Non-repetitive current pulse, per Fig.3 and derated above TA=25 °C per Fig.4 3. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum 4. VF <3.5V for devices of VBR<5...