RECOVERY RECTIFIERS. FR107S Datasheet

FR107S RECTIFIERS. Datasheet pdf. Equivalent

Part FR107S
Description FAST RECOVERY RECTIFIERS
Feature FR101S THRU FR107S FAST RECOVERY RECTIFIERS Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0.
Manufacture GOOD ELECTRONIC
Datasheet
Download FR107S Datasheet



FR107S
FR101S THRU FR107S
FAST RECOVERY RECTIFIERS
Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere
A-405
0.107(2.7)
0.080(2.0)
DIA.
1.0 (25.4)
MIN.
0.205(5.2)
0.166(4.2)
FEATURES
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
Fast switching for high efficiency
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
250 C/10 seconds,0.375(9.5mm) lead length,
5 lbs. (2.3kg) tension
0.025(0.65)
0.021(0.55)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case: A0405 molded plastic body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight:0.008 ounce, 0.23 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
SYMBOLS
FR
101S
FR
102S
FR
103S
FR
104S
FR
105S
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375(9.5mm) lead length at TA=75 C
VRRM
VRMS
VDC
I(AV)
50 100 200 400 600
35 70 140 280 420
50 100 200 400 600
1.0
Peak forward surge current
8.3ms single half sine-wave superimposed on
IFSM
30.0
rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.0A
VF
1.3
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=100 C
IR
5.0
50.0
Maximum reverse recovery time (NOTE 1)
trr 150 250
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
CJ
R JA
TJ,TSTG
15.0
50.0
-65 to +150
Note:1.Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A
2.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3.Thermal resistance from junction to ambient at 0.375(9.5mm)lead length,P.C.B. mounted
FR
106S
800
560
800
FR
107S
1000
700
1000
500
UNITS
VOLTS
VOLTS
VOLTS
Amp
Amps
Volts
A
ns
pF
C/W
C
1 GOOD ELECTRONIC CO., LTD



FR107S
RATINGS AND CHARACTERISTIC CURVES FR101S THRU FR107S
FIG. 1- FORWARD CURRENT DERATING CURVE
1.0
0.8
0.6
0.4 Single Phase
Half Wave 60Hz
Resistive or
inductive Load
0
0 25 50 75 100 125 150 175
AMBIENT TEMPERATURE, C
FIG. 3-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
20
10
1
0.1
0.01
0.6
0.8
TJ=25 C
PULSE WIDTH=300 s
1%DUTY CYCLE
1.0 1.2 1.4 1.5
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
FIG. 5-TYPICAL JUNCTION CAPACITANCE
200
100 TJ=25 C
10
1
0.1 1.0 10 100
REVERSE VOLTAGE,VOLTS
FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT
30
25
20
15
10 8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
5.0
1
10
NUMBER OF CYCLES AT 60 Hz
100
FIG. 4-TYPICAL REVERSE CHARACTERISTICS
1,000
100
10
TJ=100 C
1
0.1
TJ=25 C
0.01 0
20 40 60 80 100
PERCENT OF PEAK REVERSE VOLTAGE,%
FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE
100
10
1
0.1
0.01
0.1 1
10
t,PULSE DURATION,sec.
100
2 GOOD ELECTRONIC CO., LTD





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)