GPS RECEIVER. TD1204 Datasheet

TD1204 RECEIVER. Datasheet pdf. Equivalent

Part TD1204
Description LOW-CURRENT SIGFOX GATEWAY AND GPS RECEIVER
Feature TD1204 HIGH-PERFORMANCE, LOW-CURRENT SIGFOX™ GATEWAY AND GPS RECEIVER Features SIGFOX Ready™ Gatewa.
Manufacture TELECOM
Datasheet
Download TD1204 Datasheet



TD1204
TD1204
HIGH-PERFORMANCE, LOW-CURRENT SIGFOX™ GATEWAY AND GPS RECEIVER
Features
SIGFOX Ready™ Gateway and RF transceiver
Frequency range = ISM 868 MHz
Receive sensitivity =-126 dBm
Modulation
(G)FSK, 4(G)FSK, GMSK
OOK
Max output power
+14 dBm
Low active radio power consumption
22 µA RX (windowed mode)
37 mA TX @ +10 dBm
Multi-GNSS GPS Receiver
Multi-GNSS support
GPS/GLONASS
SBAS augmentation services
Ultra-low power consumption
22 mA Acquisition
15 µA Backup
High Sensitivity
56-channel engine
-162 dBm Tracking
-148 dBm Cold start
Ultra-low power 3D Accelerometer
Up to ±16g full scale
Board characteristics
Power supply = 2.3 to 3.6 V
2.5 µA idle state consumption
LGA41 (41.91×12.7×3.81mm) Land Grid Array package
Available in several conditioning methods
Applications
SIGFOX™ transceiver (fully certified)
Geolocation and Tracking
Universal Timing and Synchronization
Sensor network
Health monitors
Pin Assignments
GND 1
Reserved 2
Reserved 3
NC 4
DB3 5
DB2 6
SDA 7
SCL 8
VDD 9
NC 10
GND 11
VDD 12
Reserved 13
Reserved 14
Reserved 15
Reserved 16
Reserved 17
Reserved 18
Reserved 19
42
GPS
41 GND
40 RF
39 GND
38 Reserved
37 GND
36 TIM2
35 ADC0
34 RX
33 TX
32 NC
31 NC
30 DAC0
29 RST
28 NC
27 GND
26 GND
25 V_IO
24 IO_EXT
23 GND
22 GND
21 Reserved
20 Reserved
Patents pending
Home security and alarm
Industrial control
Remote control
Vehicles and objects tracking
People and pets geolocation
Rev 1.3 (08/14)
1



TD1204
TD1204
Disclaimer: The information in this document is provided in connection with Telecom Design products. No
license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document
or in connection with the sale of Telecom Design products.
TELECOM DESIGN ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR
STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
IN NO EVENT SHALL TELECOM DESIGN BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL,
PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR
LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE
OR INABILITY TO USE THIS DOCUMENT, EVEN IF TELECOM DESIGN HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Telecom Design makes no representations or warranties with respect to the accuracy or completeness of the
contents of this document and reserves the right to make changes to specifications and product descriptions at
any time without notice. Telecom Design does not make any commitment to update the information contained
herein. Unless specifically provided otherwise, Telecom Design products are not suitable for, and shall not be
used in, automotive applications. Telecom Design products are not intended, authorized, or warranted for use as
components in applications intended to support or sustain life.
© 2013-2014 Telecom Design S.A. All rights reserved. Telecom Design®, logo and combinations thereof, are
registered trademarks of Telecom Design S.A. SIGFOX™ is a trademark of SigFox S.A. ARM®, the ARM
Powered® logo and others are the registered trademarks or trademarks of ARM Ltd. I2C™ is a trademark of
Koninklijke Philips Electronics NV. Other terms and product names may be trademarks of other.
2 Rev 1.3 (08/14)





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)