V1.1 Sept 2014
Power-Over-HDBaseT (PoH) Module
Pb ¾ PoH, Cisco ® UPOE, IEEE802.3at
and IEEE802.3af compliant
¾ Maximum 100 Watt output power
¾ High efficiency DC/DC converter
¾ Wide adjustable output voltage
¾ 1500Vdc isolation (input to output)
¾ Input voltage range 52V to 57V
¾ Low output ripple and noise
¾ Minimal (low cost) external
¾ Overload, thermal and short-circuit
¾ Can be used with Silvertel Ag6600
¾ No minimum load required
¾ Silvertel “design-in” assistance
The Ag5610 is a Twin High Power over HDBaseT (PoH) module that can deliver up to 100
Watts of output power. Suitable for applications such as Monitors, TV’s and LED Displays.
The Ag5610 has been designed to extract power from Power Sourcing Equipment (PSE)
over a conventional twisted pair Category 5 or 6 Ethernet cable. The module’s input
conforms to the PoH, IEEE802.3af and IEEE803.2at standards for signature recognition.
The high efficiency DC/DC converter operates over a wide input voltage range and
provides a regulated low ripple and low noise output. The DC/DC converter also has built-
in overload, thermal and short-circuit output protection.
© Silver Telecom 2014