ESD suppressor. 0402ESDA-MLP Datasheet

0402ESDA-MLP suppressor. Datasheet pdf. Equivalent

Part 0402ESDA-MLP
Description ESD suppressor
Feature Technical Data 0402-MLP Effective August 2017 Supersedes March 2007 0402ESDA-MLP ESD suppressor n.
Manufacture EATON
Download 0402ESDA-MLP Datasheet

Technical Data 0402-MLP
Effective August 2017
Supersedes March 2007
ESD suppressor
ne 1, d2.010 7Surface Mount Device
e Ju lete is 36Product features
tiv e nt #4Ultra-low capacitance (0.05 pF typ.) ideal for high
speed data applications
p e tProvides ESD protection with fast response time
ffec de m e(<1 ns) allowing equipment to pass IEC 61000-4-2
e elevel 4 test
Single-line, bi-directional device for placement
e is c hflexibility
d ry la sLow profile 0402/1005 design for board space
p taLow leakage current (<0.1 nA typ.) reduces power
ESD port protection for mobile/smart phones
Game console ESD port protection
High speed ESD data port protection
Tablets, notebooks, netbooks, laptops
High definition television (HDTV)
Media players
Digital cameras
Medical equipment
Computers and peripherals ESD port protection
Consumer electronics
Ordering Information
Catalog Number
10,000 pieces in paper tape on
7" (178mm) reel
2,500 pieces in paper tape on
7" (178mm) reel
tinu ento d re daElectrical Characteristics
on inv de P1Characteristic
isc til n LRated Voltage
D n me -MClamping Voltage1
Trigger Voltage2
u ACapacitance (@1 MHz)
or om DAttenuation Change (0-6 GHz)
c SLeakage Current (@12 VDC)
ESD Capability
Re 2EIEC61000-4-2 Direct Discharge
0IEC61000-4-2 Air Discharge
04ESD Pulse Withstand1
30 VDC maximum
35 V typical
300 V typical
0.05 pF typ., 0.15 pF max.
-0.2 dB typical
<0.1 nA typical
8 kV typical
15 kV typical
>1000 typical
1. Per IEC61000-4-2, Level 4 waveform (8 kV direct, 30 A)
measured 30ns after initiation of pulse.
2. Trigger measurement made using Transmission Line Pulse
(TLP) method.
3. Minor shifting in characteristics may be observed over
multiple ESD pulses at very rapid rate.

Technical Data 0402-MLP
Effective August 2017
ESD suppressor
Product Dimensions: mm [inches]
Solder Pad Recommendation:
mm [inches]
01Design Considerations
, 2The location in the circuit for the MLP family has to be carefully determined. For better performance, the device should be placed
1as close to the signal input as possible and ahead of any other component. Due to the high current associated with an ESD
event, it is recommended to use a “0-stub” pad design (pad directly on the signal/data line and second pad directly on common
e .ground).
e Jun leted is 67Environmental Specifications:
3• Load Humidity: 12VDC per EIA/IS-772 Para. 4.4.2, +85°C, 85% RH for 1000 hours
t 4• Thermal Shock: EIA/IS-722 Para 4.6, Air to Air -55°C to +125°C, 5 cycles
tiv e n #• Moisture Resistance Test: MIL-STD-202G Method 106G, 10 cycles
p e t• Mechanical Shock: EIA/IS-722 Para. 4.9
ffec de m e• Vibration: EIA/IS-722 Para. 4.10
e e• Resistance to Solvent: EIA/IS-722 Para. 4.11
• Operating & Storage Temperature Range: -55°C to +125°C
d e ry is lac shSoldering Recommendations
p ta• Compatible with lead and lead-free solder reflow processes
e• Peak reflow temperatures and durations:
u to re a• IR Reflow = 260°C max for 10 sec. max.
tin n d• Wave Solder = 260°C max. for 10 sec. max.
e d• Recommended IR Reflow Profile:
DisocroRunnetciloimn2vmESenDdAe-MLP1Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written
approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly
0used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
4Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also
0 reserves the right to change or update, without notice, any technical information contained in this bulletin.
Electronics Division
1000 Eaton Boulevard
Cleveland, OH 44122
United States
© 2017 Eaton
All Rights Reserved
Printed in USA
Publication No. 0402-MLP BU-
August 2017
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.

@ 2014 :: :: Semiconductors datasheet search & download site (Privacy Policy & Contact)