JIEJIE MICROELECTRONICS CO. , Ltd
JRB Series 6000W TVS
The JRB series of high current uni/bi-directional transient
suppressors are designed for A.C. line protection and high
power DC bus clamping applications. These devices offer
uni/bi-directional port protection from 20 volts to 43 volts.
They provide a clamping voltage lower than the avalanche
voltage. Therefore, any voltage rise due to increased
current conduction is contained to a minimum, providing
the best possible protection level. They can also be
connected in series and/or parallel to create very high
capacity protection solutions.
Low incremental surge resistance.
Excellent clamping capability.
JEDEC R-6/P-600 molded plastic.
Color band denoted cathode except bidirectional.
High temperature wave soldering: 265℃/10s at terminals.
Plastic package has under writers laboratory flammability 94V-0.
6000W peak pulse power capability at 10×1000μs waveform.
Fast response time: typically less than 1.0ps from 0V to VBR min.
ABSOLUTE MAXIMUM RATINGS(TA=25℃, RH=45%-75%, unless otherwise noted)
Peak pulse power dissipation on 10/1000μs
Peak pulse current on 10/1000μs waveform
Steady state power dissipation at TL=75℃
Operating junction and storage temperature
Peak forward surge current, 8.3ms single
Typical thermal resistance junction to lead
Typical thermal resistance junction to
See next table
-55 to +175
-1 / 4-