High Voltage High Current High and Low Side Driver
High Voltage High Current High and Low Side Driver
NCP5183, NCV5183
The NCP5183 is a High Voltage High Current Power MOS...
Description
High Voltage High Current High and Low Side Driver
NCP5183, NCV5183
The NCP5183 is a High Voltage High Current Power MOSFET Driver providing two outputs for direct drive of two N−channel power MOSFETs arranged in a half−bridge (or any other high−side + low−side) configuration.
It uses the bootstrap technique to insure a proper drive of the High−side power switch. The driver works with two independent inputs to accommodate any topology (including half−bridge, asymmetrical half−bridge, active clamp and full−bridge…).
Features
Automotive Qualified to AEC Q100 Voltage Range: up to 600 V dV/dt Immunity 50 V/ns Gate Drive Supply Range from 9 V to 18 V Output Source / Sink Current Capability 4.3 A / 4.3 A 3.3 V and 5 V Input Logic Compatible Extended Allowable Negative Bridge Pin Voltage Swing to –10 V
Matched Propagation Delays between Both Channels Propagation Delay 120 ns typically Under VCC LockOut (UVLO) for Both Channels
Pin to Pin Compatible with Industry Standards These are Pb−free Devices
Typical Application
Power Supplies for Telecom and Datacom Half−Bridge and Full−Bridge Converters Push−Pull Converters High Voltage Synchronous−Buck Converters Motor Controls Electric Power Steering Class−D Audio Amplifiers
DATA SHEET www.onsemi.com
8 1
SOIC−8 NB CASE 751−07
MARKING DIAGRAM
8
NCx5183 ALYW G
G
1
x
= P or V
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either l...
Similar Datasheet