Stepper Motor
PFCU20
Tin-Can Steppers
connector insertion direction
Specifications
Specification Excitation Mode Step Angle Steps ...
Description
PFCU20
Tin-Can Steppers
connector insertion direction
Specifications
Specification Excitation Mode Step Angle Steps Per Revolution* Rated Voltage Resistance1 Inductance1 Max. Torque Starting Pulse Rate1* Slewing Pulse Rate1* Operating Temp. Range Temperature Rise* Weight Gear Ratio, Backlash
Unit
˚
V Ω mH mN·m pps pps ˚C ˚C g
PFCU20 Full-step (2-2)
0.9 400 12 160 ±7% 59 (1 Vrms, 1 Khz) 10 650 or more (with no load) 800 or more (with no load) -10 to +50 70 25 1/10, 7˚ or less
All tin-can motor specifications are based on full-step constant voltage operation
Magnet type: Neodymium Note 1: Supply voltage 12V ±2% and at a temperature of 20˚C ±2% and relative humidity 65% ±20%. Note 2: Stated terminal voltage is with supply voltage 12V. Note 3: Stated temperature rise is at the time of saturation.
Torque mN·m
Torque Curve*
12.5 Normal Gear Strength
10.0 Pull-out Torque
7.5
5.0 Pull-in Torque 2.5
0 200 400 600 800 1000 Pulse Ra(tepps)
Connector
Applicable Housing: SHR-04...
Similar Datasheet