TSOP75236W

www.vishay.com TSOP752..W, TSOP754..W Vishay Semiconductors IR Receiver Modules for Remote Control Systems DESIGN SUPPORT TOOLS click logo to get started Models Available MECHANICAL DATA Pinning: 1, 4 = GND, 2 = VS, 3 = OUT ORDERING CODE Taping: TSOP75...WTT - top view taped TSOP75...WTR - side view taped FEATURES Very low supply current Photo detector and preamplifier in one package Internal filter for PCM frequency Supply voltage: 2.5 V to 5.5 V Improved immunity against ambient light Capable of side or top view Low profile 2.35 mm Insensitive to supply voltage ripple and noise Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION The TSOP75...W series are miniaturized SMD IR receiver modules for infrared remote control systems. Two PIN diodes and a preamplifier are assembled on a leadframe, the epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. The TSOP754..W series devices are optimized to suppress almost all spurious pulses from energy saving lamps like CFLs. The AGC4 used in the TSOP754..W may suppress some data signals. The TSOP752..W series are provided primarily for compatibility with old AGC2 designs. New designs should prefer the TSOP754..W series containing the newer AGC4. These components have not been qualified according to automotive specifications. PARTS TABLE AGC 30 kHz 33 kHz Carrier 36 kHz frequency 38 kHz...