IR Receiver
www.vishay.com
TSOP752..W, TSOP754..W
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
DESIGN SUP...
Description
www.vishay.com
TSOP752..W, TSOP754..W
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
DESIGN SUPPORT TOOLS click logo to get started
Models
Available
MECHANICAL DATA Pinning: 1, 4 = GND, 2 = VS, 3 = OUT
ORDERING CODE Taping: TSOP75...WTT - top view taped TSOP75...WTR - side view taped
FEATURES Very low supply current
Photo detector and preamplifier in one package
Internal filter for PCM frequency
Supply voltage: 2.5 V to 5.5 V
Improved immunity against ambient light
Capable of side or top view
Low profile 2.35 mm
Insensitive to supply voltage ripple and noise
Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
DESCRIPTION
The TSOP75...W series are miniaturized SMD IR receiver modules for infrared remote control systems. Two PIN diodes and a preamplifier are assembled on a leadframe, the epoxy package contains an IR filter.
The demodulated output signal can be directly connected to a microprocessor for decoding.
The TSOP754..W series devices are optimized to suppress almost all spurious pulses from energy saving lamps like CFLs. The AGC4 used in the TSOP754..W may suppress some data signals. The TSOP752..W series are provided primarily for compatibility with old AGC2 designs. New designs should prefer the TSOP754..W series containing the newer AGC4.
These components have not been qualified according to automotive specifications.
PARTS TABLE
AGC
30 kHz
33 kHz
Carrier
36 kHz
frequency 38 kHz...
Similar Datasheet