4 Megabit Serial Flash Memory
EN25F40A
EN25F40A 4 Megabit Serial Flash Memory with 4Kbyte Uniform Sector
FEATURES
• Single power supply operation - F...
Description
EN25F40A
EN25F40A 4 Megabit Serial Flash Memory with 4Kbyte Uniform Sector
FEATURES
Single power supply operation - Full voltage range: 2.7-3.6 volt
Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3
4 M-bit Serial Flash - 4 M-bit/512 K-byte/2,048 pages - 256 bytes per programmable page
Standard, Dual or Quad SPI - Standard SPI: CLK, CS#, DI, DO, WP#, HOLD# - Dual SPI: CLK, CS#, DQ0, DQ1, WP#, HOLD# - Quad SPI: CLK, CS#, DQ0, DQ1, DQ2, DQ3
High performance - 104MHz clock rate for Standard SPI - 104MHz clock rate for two data bits - 104MHz clock rate for four data bits
Low power consumption - 10mA typical active current - 1 µA typical power down current
Uniform Sector Architecture: - 128 sectors of 4-Kbyte - 16 blocks of 32-Kbyte - 8 blocks of 64-Kbyte - Any sector or block can be erased individually
Software and Hardware Write Protection:
- Write Protect all or portion of memory via software
- Enable/Disable protection with WP# pin
...
Similar Datasheet