128 Megabit 3V Serial Flash Memory
EN25QH128A (2TC)
EN25QH128A (2TC)
preliminary
128 Megabit 3V Serial Flash Memory with 4Kbyte Uniform Sector
FEATURES...
Description
EN25QH128A (2TC)
EN25QH128A (2TC)
preliminary
128 Megabit 3V Serial Flash Memory with 4Kbyte Uniform Sector
FEATURES
Single power supply operation - Full voltage range: 2.7-3.6 volt
Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3
128 M-bit Serial Flash - 128 M-bit / 16,384 KByte /65,535 pages - 256 bytes per programmable page
Standard, Dual or Quad SPI - Standard SPI: CLK, CS#, DI, DO - Dual SPI: CLK, CS#, DQ0, DQ1 - Quad SPI: CLK, CS#, DQ0, DQ1, DQ2, DQ3 - Configurable dummy cycle number
High performance - Normal read
- 83MHz - Fast read (Single Data Rate Mode)
- Standard SPI: 104MHz with 1 dummy bytes - Dual SPI: 104MHz with 1 dummy bytes - Quad SPI: 104MHz with 3 dummy bytes
Support Serial Flash Discoverable
Parameters (SFDP) signature
Low power consumption - 5 mA typical active current - 1A typical power down current
Uniform Sector Architecture: - 4096 sectors of 4-Kbyte - 512 blocks of 32-Kbyte - 256 blocks of 64-Kbyte
- An...
Similar Datasheet