32 Megabit 1.8V Serial Flash Memory
EN25S32A (2S)
EN25S32A (2S) 32 Megabit 1.8V Serial Flash Memory with 4Kbyte Uniform Sector
FEATURES
• Single power sup...
Description
EN25S32A (2S)
EN25S32A (2S) 32 Megabit 1.8V Serial Flash Memory with 4Kbyte Uniform Sector
FEATURES
Single power supply operation – Full voltage range: 1.65-1.95 volt
Serial Interface Architecture – SPI Compatible: Mode 0 and Mode 3
32 M-bit Serial Flash – 32 M-bit / 4096 KByte / 16384 pages – 256 bytes per programmable page
Standard, Dual or Quad SPI – Standard SPI: CLK, CS#, DI, DO, WP#, HOLD# – Dual SPI: CLK, CS#, DQ0, DQ1, WP#, HOLD# – Quad SPI: CLK, CS#, DQ0, DQ1, DQ2, DQ3 – Configurable dummy cycle number
High performance – Normal read – 50MHz – Fast read – Standard SPI: 104MHz with 1 dummy bytes – Dual SPI: 104MHz with 1 dummy bytes – Quad SPI: 104MHz with 3 dummy bytes
Low power consumption – 6 mA typical active current – 0.1 µA typical power down current
Uniform Sector Architecture: – 1024 sectors of 4-Kbyte – 128 blocks of 32-Kbyte – 64 blocks of 64-Kbyte – Any sector or block can be erased individually
...
Similar Datasheet