Product Description
The PE43501 is a HaRP™-enhanced, high linearity, 5-bit RF Digital Step Attenuator (DSA). This highly...
Product Description
The PE43501 is a HaRP™-enhanced, high linearity, 5-bit RF Digital Step Attenuator (DSA). This highly versatile DSA covers a 7.75 dB attenuation range in 0.25 dB steps. The Peregrine 50Ω RF DSA provides a serial-addressable CMOS control interface. It maintains high attenuation accuracy over frequency and temperature and exhibits very low insertion loss and low power consumption. Performance does not change with VDD due to on-board
regulator. This next generation Peregrine DSA is available in a 5x5 mm 32-lead QFN footprint.
The PE43501 is manufactured on Peregrine’s UltraCMOS™ process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS.
Figure 1. Package Type
32-lead 5x5x0.85 mm QFN Package
Product Specification
PE43501
50 Ω RF Digital Attenuator 5-bit, 7.75 dB, 9 kHz - 6.0 GHz
Features HaRP™-enhanced UltraCMOS™ device
Attenuation: 0.25 dB steps to 7.75 dB
High Linearity: Typical +58 dBm IP3 Excellent low-frequency performance
3.3 V or 5.0 V Power Supply Voltage
Fast switch settling time
Programming Modes: Direct Parallel Latched Parallel Serial-Addressable: Program up to eight addresses 000 - 111
High-attenuation state @ power-up (PUP)
CMOS Compatible
No DC blocking capacitors required
Packaged in a 32-lead 5x5x0.85 mm QFN
Obsolete
Figure 2. Functional Schematic Diagram
RF Input
Switched Attenuator Array...