ULTRA HIGH SPEED MULTIPROTOCOL TRANSCEIVER
SP510
ULTRA HIGH SPEED MULTIPROTOCOL TRANSCEIVER
JUNE 2011
REV. 1.0.1
GENERAL DESCRIPTION
The SP510 is a highly integ...
Description
SP510
ULTRA HIGH SPEED MULTIPROTOCOL TRANSCEIVER
JUNE 2011
REV. 1.0.1
GENERAL DESCRIPTION
The SP510 is a highly integrated physical layer solution that is configurable to support multiple serial standards. It incorporates eight (8) drivers and eight (8) receivers, configurable for either differential (V.11 or V.35) or single ended (V.28 and V.10) signaling. The device architecture is designed to support the data and clock signals used in HDLC or SDLC serial ports as either a DTE or DCE. SP510 enables a Serial Communications Controller (SCC) to implement a variety of serial port types including V.24, V.25, V.36, EIA-530, EIA-530-A, X.21, RS-232.
Operating configuration is in-system programmable using the mode-select pins. The V.11 and V.35 modes contain built in bus termination that may be switched in or out using the TERM_OFF pin.
SP510 is ideal for space constrained applications. It requires only a single 5V supply for full operation. The VL pin determines the receiver output volta...
Similar Datasheet