OCH29803 Datasheet: 300mA Single Phase Hall-Effect DC Fan Driver





OCH29803 300mA Single Phase Hall-Effect DC Fan Driver Datasheet

Part Number OCH29803
Description 300mA Single Phase Hall-Effect DC Fan Driver
Manufacture ORIENT-CHIP
Total Page 2 Pages
PDF Download Download OCH29803 Datasheet PDF

Features: W W W OCH29803.ORIENT-CHIP.COM 1 234 OC H29803 300mA Single Phase Hall-Effect D C Fan Driver ◼ General Description T he OCH29803 is an integrated Hall senso r with H-Bridged output driver designed for brushless DC motor applications. T he device is using HV process includes an on-chip Hall sensor for magnetic sen sing, an amplifier that amplifies the H all voltage, a comparator to provide sw itching hysteresis for noise rejection, a bi-directional drivers for sinking a nd driving large current load. Placing the device in a variable magnetic field , if the magnetic flux density is large r than threshold BOP, the DO is turned to sink and DOB is turned to drive. Thi s output state is held until the magnet ic flux density reverses and falls belo w BRP, then causes DO to be turned to d rive and DOB turned to sink. OCH29803 i s available in SIP-4L package and is ra ted over the -40°C to 125°C. ◼ Fea tures ⚫ One-chip Solution (Hall Eleme nt + Driver) ⚫ Input Voltage Range : 3V to 28V ⚫ Low Output.

Keywords: OCH29803, datasheet, pdf, ORIENT-CHIP, 300mA, Single, Phase, Hall-Effect, DC, Fan, Driver, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

OCH29803
300mA Single Phase Hall-Effect DC Fan Driver
General Description
The OCH29803 is an integrated Hall sensor with
H-Bridged output driver designed for brushless
DC motor applications. The device is using HV
process includes an on-chip Hall sensor for
magnetic sensing, an amplifier that amplifies the
Hall voltage, a comparator to provide switching
hysteresis for noise rejection, a bi-directional
drivers for sinking and driving large current load.
Placing the device in a variable magnetic field, if
the magnetic flux density is larger than threshold
BOP, the DO is turned to sink and DOB is turned
to drive. This output state is held until the
magnetic flux density reverses and falls below
BRP, then causes DO to be turned to drive and
DOB turned to sink.
OCH29803 is available in SIP-4L package and is
rated over the -40°C to 125°C.
Features
One-chip Solution (Hall Element + Driver)
Input Voltage Range : 3V to 28V
Low Output Switching Current Noise
Built-in VCC To GND reverse voltage protection
Rotor Lock Protection (Lock detection, output
shutdown and automatic re-start)
High Sensitivity Hall Sensor
BOP(25GS),BRP(-25GS)
Thermal Shutdown Protection
-40to +125 Temperature Range
RoHS Compliant
Available in SIP-4L(TO94) package
Applications
Single Coil Design Cooling Fans
Single Coil DC Brushless Fan
Single Coil DC Brushless Motor
Office Automated Equipment
Brown-Goods
Home Applications
Car Audio Cooling Fan
Pin Configuration
(Top View)
GND
DOB
DO
VDD
SIP-4L
Figure 1, Pin Assignments of OCH29803
Pin Name
VDD
DO
DOB
GND
Pin No.
1
2
3
4
Pin Function
Positive Power Supply
Output 1
Output 2
Ground
Typical Application Circuit
OCH29803
12 3 4
VDD
R1 Coil
4.7Ω10Ω
C1
4.7uF/50V
Note1: When the power pulse is relatively largeMust use least C1=4.7µF(ceremic capacitor) capacitor &
R1=4.7~10Ω for the decoupling between VDD and GND and place the capacitor as close to the IC as
Possible.
Figure 2, Typical Application Circuit of OCH29803 (SIP-4L)
Page1 - 2
Ver. 1.1, Feb .27, 2018
源于灿瑞 磁传天下

     






Index : 0  1  2  3   4  5  6  7   8  9  A  B   C  D  E  F   G  H  I  J   K  L  M  N   O  P  Q  R   S  T  U  V   W  X  Y  Z
@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)