D oc ument Reference N o.: FT _001277 C learance N o.: FT DI# 4 9 9
HID-class USB to
UMFT260EV1A is an FT260 DIP development module.
The UMFT260EV1A is a development module for
FTDI’s FT260, HID-class USB to UART/I2C Bridge
IC. The UMFT260EV1A is ideal for development
purposes to quickly prove functionality of adding
USB to a target design.
The UMFT260EV1A is a module which is designed
to plug into a standard 0.8” wide 24 pin DIP
socket. The USB connection to a host system is
via a Micro USB-B connector.
All components used, including the FT260 are Pb-
free (RoHS compliant).
The UMFT260EV1A is built with a FT260; many of the
features of the FT260 can be utilized with this module.
For further details of FT260 features, please refer to
the FT260 datasheet, DS_FT260, is available at
http://w w w.ftdichip.co m/FT260.
In addition to the features listed in the FT260
datasheet, the UMFT260EV1A has the following
PCB assembly module is designed to fit a standard
20.32mm (0.8”) wide 24 pin DIP socket. Pins are
on a 2.54mm (0.1”) pitch.
An on-board Micro USB-B type connector allows
modules to be connected to a host system via a
standard USB A to Micro B cable.
On-board I2C 2kbits EEPROM (address:0x50) to
contain FT260 configuration settings and vendor
specific parameters (I2C pull-high circuit is
implemented as default)
Jumpers for selecting the FT260 HID interfaces
Solder jumpers for configuring the FT260Q to be
in USB Bus powered or Self powered modes.
N either the whole nor any part of the information c ontained in, or the product described in this manual, may be adapted or
reproduced in any material or elec tronic form without the prior written c onsent of the c opyright holder. T his product and its
doc umentation are s upplied on an as- is basis and no warranty as to their s uitability for any partic ular purpos e is either made or
implied. Future T ec hnology Devic es I nternational L td will not accept any claim for damages hows oever arising as a res ult of u se or
failure of this produc t. Y our statutory rights are not affecte d. T his produc t or any variant of it is not intended for us e in any
medical appliance, device or s ystem in whic h the failure of the produc t might reasonably be expected to res ult in pers onal in jury.
T his doc ument provides preliminary information that may b e s ubject to c hange without notice. N o freedom to use patents or other
intellec tual property rights is implied by the publication of this doc ument. Future Tec hnology D evices I nternational L td, U ni t 1 , 2
Seaward P lac e, C enturion Business P ark, G lasgow G 4 1 1HH U nited Kingdom. Sc otland Registered C ompany N umber: SC 136640
Copyright © Future Technology Devices International Limited