Protection Array. SPE0515 Datasheet

SPE0515 Array. Datasheet pdf. Equivalent

Part SPE0515
Description 5-Line ESD Protection Array
Feature SPE0515 5-Line ESD Protection Array DESCRIPTION The SPE0515 are designed by TVS array that is to pr.
Manufacture SYNC POWER
Datasheet
Download SPE0515 Datasheet



SPE0515
SPE0515
5-Line ESD Protection Array
DESCRIPTION
The SPE0515 are designed by TVS array that is to protect
sensitive electronics from damage or latch-up due to ESD.
They are designed for use in applications where board
space is at a premium. SPE0515 will protect up to five
lines, and may be used on lines where the signal polarities
swing above and below ground.
SPE0515 offer desirable characteristics for board level
protection including fast response time, low operating and
clamping voltage, and no device degradation.
SPE0515 may be used to meet the immunity requirements
of IEC 61000-4-2, level 4. The small SOT-563 package
makes them ideal for use in portable electronics such as
cell phones, PDA’s, notebook computers, and digital
cameras.
APPLICATIONS
Cellular Handsets and Accessories
Cordless Phone
PDA
Notebooks and Handhelds
Portable Instrumentation
Digital Cameras
MP3 Player
FEATURES
Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
Protects five I/O lines
Working voltage: 5V
Low leakage current
Low operating and clamping voltages
PIN CONFIGURATION ( SOT-563 / SC-89 )
PART MARKING
2010/06/23 Ver.5
Page 1



SPE0515
SPE0515
5-Line ESD Protection Array
ORDERING INFORMATION
Part Number
SPE0515S56RG
SPE0515S56RG : Tape Reel ; Pb – Free
Package
SOT-563
Part Marking
5
ABSOULTE MAXIMUM RATINGS
(TA=25Unless otherwise noted)
Parameter
Peak Pulse Power ( tp = 8/20 μs )
Maximum Peak Pulse Current ( tp = 8/20 μs )
ESD per IEC 61000 – 4 – 2 (Air )
ESD per IEC 61000 – 4 – 2 (Contact )
Operating Junction Temperature
Storage Temperature Range
Lead Soldering Temperature
Symbol
Ppk
Ipp
Vpp
Vpp
TJ
TSTG
TL
Typical
250
7
±15
±8
-55 ~ 125
-55 ~ 150
260 ( 10sec )
Unit
W
A
KV
KV
ELECTRICAL CHARACTERISTICS
(TA=25Unless otherwise noted)
Parameter
Reverse Stand – Off Voltage
Reverse Breakdown Voltage
Reverse Leakage Current
Reverse Leakage Current
Clamping Voltage
Clamping Voltage
Junction Capacitance
Symbol
Conditions
Min. Typ Max. Unit
VRWM
5V
VBR It = 1mA
6
V
IR VRWM = 5V , T=25
0.01 1 μA
IR VRWM = 3V , T=25
0.01 0.5 μA
VC Ipp = 1A , tp = 8/20 μs
11 V
VC Ipp = 7A , tp = 8/20 μs
Cj
Between I/O Pin and GND
VR = 0V , f = 1MHz
15 V
10 20 pF
2010/06/23 Ver.5
Page 2





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)