SiP Module. BGM11S Datasheet

BGM11S Module. Datasheet pdf. Equivalent

Part BGM11S
Description Blue Gecko Bluetooth SiP Module
Feature BGM11S Blue Gecko Bluetooth® SiP Module Data Sheet The BGM11S Blue Gecko Bluetooth® SiP Module fami.
Manufacture Silicon Labs
Datasheet
Download BGM11S Datasheet



BGM11S
BGM11S Blue Gecko Bluetooth® SiP
Module Data Sheet
The BGM11S Blue Gecko Bluetooth® SiP Module family is targeted for applications
where ultra-small size, reliable high performance RF, low-power consumption and easy
application development are key requirements.
At 6.5 x 6.5 x 1.4 mm the BGM11S module fits applications where size is a constraint.
BGM11S also integrates a high performance, ultra robust antenna, which requires mini-
mal PCB, plastic and metal clearance. The total PCB area required by BGM11S is only
51 mm2. The BGM11S has Bluetooth, CE, full FCC, ISED Canada, Japan and South-Ko-
rea certifications.
The BGM11S also integrates a Bluetooth 4.2 compliant Bluetooth stack and it can also
run end-user applications on-board or alternatively used as a network co-processor over
one of the host interfaces.
BGM11S SIP modules can be used in a wide variety of applications:
• Wearables
• IoT end devices and gateways
• Health, sports and wellness devices
• Industrial, home and building automation
• Smart phone, tablet and PC accessories
• Beacons
KEY FEATURES
• Bluetooth 4.2 low energy compliant
• Integrated antenna or RF pin
• TX power up to +8 dBm
• RX sensitivity: -90 dBm
• Range: up to 200 meters
32-bit ARM® Cortex®-M4 core at 38.4
MHz
• Flash memory: 256 kB
• RAM: 32 kB
• Autonomous Hardware Crypto Accelerator
and Random Number Generator
• Integrated DC-DC Converter
• Onboard Bluetooth stack
Core / Memory
ARM Cortex M4 processor
with DSP extensions and FPU
Memory
Protection Unit
Flash Program
Memory
RAM Memory Debug Interface DMA Controller
Antenna
Radio Transceiver
Crystals
Clock Management
38.4MHz
32.768kHz
High Frequency High Frequency
Crystal Oscillator RC Oscillator
Low Frequency
RC Oscillator
Auxiliary
High Frequency
RC Oscillator
Low Frequency
Crystal Oscillator
Ultra Low
Frequency
RC Oscillator
32-bit bus
Peripheral Reflex System
Serial Interfaces
I/O Ports
Chip antenna
Matching
RFSENSE
DEMOD
BALUN
I
LNA
RF Frontend
PA
Q
PGA
Frequency
Synthesizer
IFADC
AGC
MOD
USART
Low Energy
UART
I2C
External
Interrupts
General Purpose
I/O
Pin Reset
Pin Wakeup
Lowest power mode with peripheral operational:
EM0—Active
EM1—Sleep
EM2—Deep Sleep
EM3—Stop
Energy Management
Voltage
Regulator
Voltage Monitor
DC-DC
Converter
Power-On Reset
Brown-Out
Detector
Timers and Triggers
Timer/Counter
Protocol Timer
Low energy timer
Watchdog Timer
Pulse Counter
RTCC
Cryotimer
EM4—Hibernate
Other
CRYPTO
CRC
Analog I/F
ADC
Analog
Comparator
IDAC
EM4—Shutoff
silabs.com | Building a more connected world.
Rev. 1.1



BGM11S
1. Feature List
The BGM11S highlighted features are listed below.
Low Power Wireless System-on-Chip.
High Performance 32-bit 38.4 MHz ARM Cortex®-M4 with
DSP instruction and floating-point unit for efficient signal
processing
• 256 kB flash program memory
• 32 kB RAM data memory
• 2.4 GHz radio operation
• TX power up to +8 dBm
Low Energy Consumption
• 8.7 mA RX current at 2.4 GHz
• 8.2 mA TX current @ 0 dBm output power at 2.4 GHz
• 63 μA/MHz in Active Mode (EM0)
• 2.5 μA EM2 DeepSleep current (full RAM retention and
RTCC running from LFXO)
• 2.1 μA EM3 Stop current (State/RAM retention)
• Wake on Radio with signal strength detection, preamble
pattern detection, frame detection and timeout
High Receiver Performance
• -90 dBm sensitivity @ 1 Mbit/s GFSK (2.4 GHz)
Supported Protocols
Bluetooth®
Support for Internet Security
• General Purpose CRC
• Random Number Generator
• Hardware Cryptographic Acceleration for AES 128/256,
SHA-1, SHA-2 (SHA-224 and SHA-256) and ECC
BGM11S Blue Gecko Bluetooth® SiP Module Data Sheet
Feature List
Wide Selection of MCU peripherals
• 12-bit 1 Msps SAR Analog to Digital Converter (ADC)
• 2 × Analog Comparator (ACMP)
• Digital to Analog Current Converter (IDAC)
• 32 pins connected to analog channels (APORT) shared be-
tween Analog Comparators, ADC, and IDAC
• 30 General Purpose I/O pins with output state retention and
asynchronous interrupts
• 8 Channel DMA Controller
• 12 Channel Peripheral Reflex System (PRS)
• 2×16-bit Timer/Counter
• 3 + 4 Compare/Capture/PWM channels
• 32-bit Real Time Counter and Calendar
• 16-bit Low Energy Timer for waveform generation
• 32-bit Ultra Low Energy Timer/Counter for periodic wake-up
from any Energy Mode
• 16-bit Pulse Counter with asynchronous operation
• Watchdog Timer with dedicated RC oscillator @ 50 nA
• 2×Universal Synchronous/Asynchronous Receiver/Trans-
mitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I2S)
Low Energy UART (LEUART)
I2C interface with SMBus support and address recognition
in EM3 Stop
Wide Operating Range
• 1.85 V to 3.8 V single power supply
• 2.4 V to 3.8 V when using DC-DC
• Integrated DC-DC
• -40 °C to +85 °C
Dimensions
• 6.5 x 6.5 x 1.4 mm
silabs.com | Building a more connected world.
Rev. 1.1 | 2





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)