35V, 1.5A, Stepper Motor Driver
The MP6600 is a stepper motor driver with a
built-in translator and current regulation.
Current sensing is internal and requires no
external sense resistors. High integration and a
small package size make the MP6600 a space-
saving and cost-effective solution for bipolar
stepper motor drives.
The MP6600 operates from a supply voltage of
up to 35V and can deliver motor currents up to
1.5A (depending on PCB design and thermal
conditions). The MP6600 can operate a bipolar
stepper motor in full- half-, quarter-, or eighth-
step modes. Internal safety features include
over-current protection (OCP), input over-
voltage protection (OVP), under-voltage lockout
(UVLO), and thermal shutdown.
The MP6600 is available in a QFN-24
Wide 4.5V to 35V Input Voltage Range
Two Internal Full-Bridge Drivers
Internal Current Sensing and Regulation
Low On Resistance (HS: 195mΩ, LS:
No Control Power Supply Required
Simple Logic Interface
3.3V and 5V Compatible Logic Supply
Step Modes from Full-Step to Eighth-Step
1.5A Output Current
Automatic Current Decay
Over-Current Protection (OVP)
Input Over-Voltage Protection (OVP)
Thermal Shutdown and Under-Voltage
Lockout (UVLO) Protection
Fault Indication Output
Available in a QFN-24 (4mmx4mm)
Bipolar Stepper Motors
All MPS parts are lead-free, halogen-free, and adhere to the RoHS
directive. For MPS green status, please visit the MPS website under
Quality Assurance. “MPS” and “The Future of Analog IC Technology” are
registered trademarks of Monolithic Power Systems, Inc.
MP6600 Rev. 1.01
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2017 MPS. All Rights Reserved.