IR Receiver
www.vishay.com
TSOP932.., TSOP934..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
23051
LINKS...
Description
www.vishay.com
TSOP932.., TSOP934..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
23051
LINKS TO ADDITIONAL RESOURCES
Product Page
3D 3D
3D Models
Calculators
Marking
Packages
Holders
Bends and Cuts
FEATURES Improved dark sensitivity Improved immunity against optical noise Very low supply current Photo detector and preamplifier in one package Internal filter for PCM frequency Supply voltage: 2.0 V to 3.6 V Insensitive to supply voltage ripple and noise Material categorization:
for definitions of compliance please see www.vishay.com/doc?99912
MECHANICAL DATA 1 = OUT, 2 = GND, 3 = VS
ORDERING CODE TSOP93... - 1800 pieces in bags
DESCRIPTION
The TSOP93... series devices are the latest generation miniaturized IR receiver modules for infrared remote control systems. These series provide improvements in sensitivity to remote control signals in dark ambient as well as in sensitivity in the presence of optical disturbances e.g. from CFLs.
The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding.
The TSOP932.. and TSOP934.., series devices are designed to receive long burst codes (10 or more carrier cycles per burst). The third digit designates the AGC level (AGC2 or AGC4) and the last two digits designate the band-pass frequency (see table below). The higher the AGC, the better noise ...
Similar Datasheet