Power Modules. TMPS10-105 Datasheet

TMPS10-105 Modules. Datasheet pdf. Equivalent


TRACO POWER TMPS10-105
AC/DC Power Modules
TMPS 10 Series, 10 Watt
Ultra Compact 10 Watt PCB Power
module in 1" x 1.5" package
Certified to EN 60335-1 and UL 62368-1
for household and industrial appliance
Reinforced I/O isolation 4000 VAC
Operating temperature range
–25°C to +70°C
Allows 130% peak current up to 30 s
Ready to meet ErP directive, < 0.15 W
no load power consumption
EMI meets EN 55032 class B
and EN 55014-1
Protection class II prepared
3-year product warranty
CB
Scheme
IEC/EN 62368-1
IEC/EN 60335-1
UL 62368-1 prepared
The TMPS 10 series comprises ultra compact AC/DC power supply modules in
a lightweight fully encapsulated plastic casing for PCB mount. Beside the latest
safety approvals for industrial and IT solutions (IEC/EN/UL 62368-1), they are
also certified to IEC/EN 60335-1 for household appliance. These 10 Watt mod-
ules are the ideal solution for low power or segregated circuits when space is
critical or for an efficient powering of a standby mode when compliance to ErP
directive is required. A peak current of 130% facilitates the activation of main
circuits.
Models
Order Code
TMPS 10-103
TMPS 10-105
TMPS 10-109
TMPS 10-112
TMPS 10-115
TMPS 10-124
TMPS 10-148
Output Power
(max.)
8.6 W
10 W
Output Voltage
3.3 VDC
5 VDC
9 VDC
12 VDC
15 VDC
24 VDC
48 VDC
Output Current
max.
peak 1)
2600 mA
3380 mA
2000 mA
2600 mA
1100 mA
1440 mA
830 mA
1080 mA
660 mA 860 mA
410 mA 530 mA
210 mA 270 mA
1) < 30 s with maximum duty cycle of 10%, average output power must not exceed 10 W
Efficiency
(typ.)
77 %
80 %
83 %
84 %
84 %
86 %
84 %
www.tracopower.com
Page 1 of 3


TMPS10-105 Datasheet
Recommendation TMPS10-105 Datasheet
Part TMPS10-105
Description AC/DC Power Modules
Feature TMPS10-105; AC/DC Power Modules TMPS 10 Series, 10 Watt • Ultra Compact 10 Watt PCB Power module in 1.
Manufacture TRACO POWER
Datasheet
Download TMPS10-105 Datasheet




TRACO POWER TMPS10-105
TMPS 10 Series, 10 Watt
Input Specifications
Input voltage
– AC Input 85 – 264 VAC
– DC Input 120 – 370 VDC
Input frequency 47 – 63 Hz (designed to meet: 47 – 440 Hz)
Leakage current 0.25 mA max.
Inrush current
– 115 VAC Input 20 A max.
– 230 VAC Input
40 A max.
No-load power consumption 0.15 W max.
External input fuse (required)
1.6 A (slow blow type)
Output Specifications
Voltage accuracy ±1 % typ. / ±2 % max.
Regulation
– Input variation (Vin min. to Vin max.) 0.5 % max.
– Load variation (0 to 100 %) 1.0 % max.
Minimum load not required
Hold-up time
– 115 VAC / 60 Hz Input 8 ms typ.
– 230 VAC / 50 Hz Input
40 ms typ.
Ripple and Noise (20 MHz bandwidth) 3.3 & 5 VDC models: 60 mVp-p max.
other models: 1 %(Vp-p) of Vout max.
Current limitation (long term condition may cause damage) at 150 % Iout typ. (foldback, auto recovery)
Short circuit protection hiccup, auto recovery
Output overvoltage protection
125 % of Vout typ. (by Zener diode)
Capacitive load
General Specifications
3.3 Vout model: 4‘400 µF max.
5.0 Vout model: 2‘200 µF max.
9.0 Vout model: 680 µF max.
12 Vout model: 390 µF max.
15 Vout model: 240 µF max.
24 Vout model: 100 µF max.
48 Vout model: 24 µF max.
Temperature ranges
– Operating (natural convection: 20 LFM, 0.1 m/s) –25 °C to +70 °C max.
– Case temperature +95 °C max.
– Storage temperature –40 °C to +85 °C max.
Power derating 2.5 %/K above 50 °C
Temperature coefficient 0.02 %/K max.
Altitude during operation 2000 m max.
Switching frequency
30 - 65 kHz typ. (pulse width modulation)
Humidity (non condensing) 95 % rel. H max.
Isolation voltage (60 s) – Input/Ouput 4000 VAC
Isolation resistance
– At 500 VDC 1GOhm min.
MTBF (MIL-HDBK-217F, at 25 °C ground benign) 450'000 h
Case material Plastic resin (UL94V-0 rated)
Pin material Tinned copper
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2 of 3



TRACO POWER TMPS10-105
TMPS 10 Series, 10 Watt
General Specifications (continued)
Protection class class II acc. IEC/EN 60536
Safety standards
IEC/EN/UL 60950-1
IEC/EN/UL 62368-1
IEC/EN 60335-1
– Certification documents www.tracopower.com/overview/tmps10
EMC emission
– Conducted & Radiated input suppression EN 55014-1, EN 55032, FCC part 15, class B
EMC immunity EN 55014-2, EN 55024
– Electrostatic discharge (ESD) EN 61000-4-2, air ±8kV, contact ±6 kV,
perf. criteria A
– Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A
– Fast transient / burst immunity EN 61000-4-4, ±2 kV, perf. criteria A
– Surge immunity EN 61000-4-5, ±1 kV, perf. criteria A
– Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A
– Magnetic field immunity EN 61000-4-8, 30 A/m, perf. criteria A
– Voltage dips EN 61000-4-11, 30% 10 ms, perf. criteria A
– Interruptions EN 61000-4-11, >95% 5 s, perf. criteria B
Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Outline Dimensions
Pinout
Pin Function
1 AC IN (N)
2 AC IN (L)
3 –Vout
4 +Vout
Weight: 29 g (1.02 oz)
Dimensions in mm [inch]
Tolerances: ±0.5 [±0.02]
Pin diameter ø : 1.0 ±0.1 [0.04 ±0.004]
© Copyright 2018 Traco Electronic AG
www.tracopower.com
Specifications can be changed without notice!
Rev. September 28, 2018
Page 3 of 3





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)