ELECTROLYTIC CAPACITORS. ELHS4H1VSN331MR45S Datasheet

ELHS4H1VSN331MR45S CAPACITORS. Datasheet pdf. Equivalent


CHEMI-CON ELHS4H1VSN331MR45S
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105
LHSSeries
For solar power generation
Endurance with ripple current : 5,000 hours at 105
Rated voltage range : 450 to 500V
For inverter control, switching power supplies
Non solvent resistant type
RoHS2 Compliant
LHS
Downsizing
LXS
Longer life
KMS
SPECIFICATIONS
Items
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Characteristics
-25 to +105
450 to 500Vdc
±20% (M)
(at 20, 120Hz)
I3 CV
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20after 5 minutes)
Rated voltage (Vdc)
450 to 500V
tanδ (Max.)
0.20
(at 20, 120Hz)
Rated voltage (Vdc)
450 to 500V
Z(-25)/Z(+20)
8
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105.
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
200% of the initial specified value (475, 500Vdc : 250%)
Leakage current
The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20after exposing them for 1,000 hours at 105without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±15% of the initial value
D.F. (tanδ)
150% of the initial specified value
Leakage current
The initial specified value
DIMENSIONS [mm]
Terminal Code : VS (φ22 to φ35) : Standard
Sleeve (PET : Brown)
Negative mark
PC board pin-out
(View from Solder side)
Terminal Code : LI (φ30,φ35)
Sleeve (PET : Brown)
Negative mark
PC board pin-out
(View from Solder side)
2-1.2×6
Vent
L±2.5
4.0±0.5
The standard design has no plastic disc.
2-φ2
Vent
PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E LHS VS N M S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 100µF:101, 330µF:331)
Dummy terminal code
Terminal code(VS, LI)
Voltage code (ex. 450V:451, 475V:4H1)
Series code
Category
Please refer to "Product code guide (snap-in type)"
L±2.5
4.5±1
5±0.5
14.2±1
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001T


ELHS4H1VSN331MR45S Datasheet
Recommendation ELHS4H1VSN331MR45S Datasheet
Part ELHS4H1VSN331MR45S
Description LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Feature ELHS4H1VSN331MR45S; LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105℃ LHSSeries ・For solar po.
Manufacture CHEMI-CON
Datasheet
Download ELHS4H1VSN331MR45S Datasheet




CHEMI-CON ELHS4H1VSN331MR45S
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105
LHSSeries
STANDARD RATINGS
Rated ripple
WV
(Vdc)
Cap
(µF)
Case size
φD×L(mm)
tanδ
current
(Arms/
105, 120Hz)
Part No.
100 22 ×25 0.20
120 22 ×30 0.20
150 22 ×35 0.20
150 25.4× 25 0.20
180 22× 40 0.20
180 25.4× 30 0.20
220 22 × 45 0.20
220 25.4×35 0.20
220 30 ×25 0.20
270 22 ×50 0.20
270 25.4×40 0.20
270 30 ×30 0.20
270 35 ×25 0.20
450
330 22× 60
330 25.4× 45
0.20
0.20
330 25.4× 50 0.20
330 30 × 35 0.20
330 35 × 30 0.20
390 25.4× 60 0.20
390 30 ×40 0.20
470 30 ×45 0.20
470 30 ×50 0.20
470 35 ×35 0.20
560 35 ×40 0.20
560 35× 45 0.20
680 30 × 60 0.20
680 35× 50 0.20
820 35× 60 0.20
0.71
0.81
0.93
0.93
1.04
1.05
1.17
1.21
1.15
1.33
1.36
1.29
1.25
1.54
1.54
1.56
1.46
1.41
1.74
1.63
1.84
1.87
1.71
1.95
1.99
2.33
2.22
2.52
ELHS451VSN101MP25S
ELHS451VSN121MP30S
ELHS451VSN151MP35S
ELHS451VSN151MQ25S
ELHS451VSN181MP40S
ELHS451VSN181MQ30S
ELHS451VSN221MP45S
ELHS451VSN221MQ35S
ELHS451VSN221MR25S
ELHS451VSN271MP50S
ELHS451VSN271MQ40S
ELHS451VSN271MR30S
ELHS451VSN271MA25S
ELHS451VSN331MP60S
ELHS451VSN331MQ45S
ELHS451VSN331MQ50S
ELHS451VSN331MR35S
ELHS451VSN331MA30S
ELHS451VSN391MQ60S
ELHS451VSN391MR40S
ELHS451VSN471MR45S
ELHS451VSN471MR50S
ELHS451VSN471MA35S
ELHS451VSN561MA40S
ELHS451VSN561MA45S
ELHS451VSN681MR60S
ELHS451VSN681MA50S
ELHS451VSN821MA60S
WV
(Vdc)
475
500
Rated ripple
Cap
(µF)
Case size
φD×L(mm)
tanδ
current
(Arms/
105, 120Hz)
Part No.
150 30 × 25 0.20 1.01 ELHS4H1VSN151MR25S
180 30 × 30 0.20 1.11 ELHS4H1VSN181MR30S
180 35 × 25 0.20 1.08 ELHS4H1VSN181MA25S
220 30 × 35 0.20 1.26 ELHS4H1VSN221MR35S
270 30 × 40 0.20 1.44 ELHS4H1VSN271MR40S
270 35 × 30 0.20 1.35 ELHS4H1VSN271MA30S
330 30 × 45 0.20 1.63 ELHS4H1VSN331MR45S
330 35 × 35 0.20 1.51 ELHS4H1VSN331MA35S
390 30 × 50 0.20 1.80 ELHS4H1VSN391MR50S
390 35 × 40 0.20 1.70 ELHS4H1VSN391MA40S
470 30 × 60 0.20 2.05 ELHS4H1VSN471MR60S
470 35 × 45 0.20 1.91 ELHS4H1VSN471MA45S
470 35 × 50 0.20 1.95 ELHS4H1VSN471MA50S
560 35 × 60 0.20 2.21 ELHS4H1VSN561MA60S
120 30 × 25 0.20 0.90 ELHS501VSN121MR25S
150 30 × 30 0.20 1.02 ELHS501VSN151MR30S
150 35 × 25 0.20 0.99 ELHS501VSN151MA25S
180 30 × 35 0.20 1.14 ELHS501VSN181MR35S
220 30 × 40 0.20 1.30 ELHS501VSN221MR40S
220 35 × 30 0.20 1.22 ELHS501VSN221MA30S
270 30 × 45 0.20 1.47 ELHS501VSN271MR45S
270 35 × 35 0.20 1.37 ELHS501VSN271MA35S
330 30 × 50 0.20 1.66 ELHS501VSN331MR50S
330 35 × 40 0.20 1.57 ELHS501VSN331MA40S
390 30 × 60 0.20 1.87 ELHS501VSN391MR60S
390 35 × 45 0.20 1.74 ELHS501VSN391MA45S
470 35 × 50 0.20 1.95 ELHS501VSN471MA50S
560 35 × 60 0.20 2.21 ELHS501VSN561MA60S
RATED RIPPLE CURRENT MULTIPLIERS
Frequency Multipliers
Frequency(Hz) 50 120 300 1k 10k 50k
450Vdc
0.77 1.00 1.16 1.30 1.41 1.43
475, 500Vdc
0.70 1.00 1.16 1.30 1.41 1.43
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001T





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)