AIC1686
Off-Line Power Supply Protection IC with Shunt Regulator
FEATURES
Overvoltage Protection for 3.3V, 5V, and 12V ...
AIC1686
Off-Line Power Supply Protection IC with Shunt
Regulator
FEATURES
Overvoltage Protection for 3.3V, 5V, and 12V Outputs. Power Good Signal for 5V Output. Remote ON/OFF Input. Uncommitted Protection Input. 5V
Regulator with 25mA Source Current. 2.5V Precision Shunt
Regulator. 8V to 16V Operation. Low Power Consumption.
DESCRIPTION
The AIC1686 is a supervisory and protection IC intended for use in off-line, multiple output power supplies. It consists of protection circuitry, power good indicator, remote ON/OFF control, and precision shunt
regulator. The overvoltage protection (OVP) function is for 3.3V, 5V, and 12V outputs. In addition, an uncommitted fault detection input (PRIN) is available for use with other protection functions, such as overcurrent, undervoltage, and/or short-circuit protection of outputs. The shunt
regulator has been included to implement the feedback control for one of the power supply’s outputs. The noniverting input (EAI) is internally tied to a precision 2.5V reference. The power good circuit monitors the 5V output and asserts, with a programmable delay, a TTL compatible high logic level at its output after the 5V output reaches the regulation range. The delay is programmed by a timing capacitor connected to CPG pin of the IC. The power good circuit sets its output low before the 5V output goes out of regulation range. The remote ON/OFF function enables the power supply to be turned on and off from the secondary side by a switch.
APPLICATIONS...