PCB Relay. T9GS1L14-48 Datasheet

T9GS1L14-48 Relay. Datasheet pdf. Equivalent

T9GS1L14-48 Datasheet
Recommendation T9GS1L14-48 Datasheet
Part T9GS1L14-48
Description DC coil 30A PCB Relay
Feature T9GS1L14-48; General Purpose Relays Power Relays T9G series, DC coil 30A PCB Relay Potter & Brumfield .
Manufacture TE
Datasheet
Download T9GS1L14-48 Datasheet




TE T9GS1L14-48
General Purpose Relays
Power Relays
T9G series, DC coil 30A PCB Relay
Potter & Brumfield
Typical applications
HVAC, Appliances, Industrial Controls, Energy Management
Approvals
UL 508; UL Listing #E214025
IEC 61810-1; VDE Listing #40045012
Technical data of approved types on request
Contact Data
Contact arrangement
1 form A (NO), 1 form B (NC), 1 form C (CO)
Rated voltage
250VAC
Max. switching voltage
480VAC
Rated current
30A 20A 20A
Contact material
AgSnO
Min. recommended contact load
1A, 12VAC/VDC
Initial contact resistance
300mΩ at 100mA/6VDC
Frequency of operation, with/without load 360 cycles / hour = with
3600 cycles / hour = without
Operate/release time max., including bounce 15/22ms
Contact ratings 1)
UL 508
Type Load
Cycles
NO 5A, 480VAC, General Purpose
6x103
NO 15,6A, 480VAC, Resistive
100x103
NO 30A, 277VAC, General Purpose, 85°C 100x103
NO 18A, 250VAC, Resistive, 105°C
100x103
NO
22A, 250VAC, Resistive
250x103
NO
22A FLA, 98A LRA, 120VAC, Def. Purpose
100x103
NO
14A FLA, 82A LRA, 250VAC, Def. Purpose, 70°C 30x103
NO
20A, 277VAC, Standard Ballast
6x103
NO 1HP, 125VAC
100x103
NO 2)
40A, 277VAC, Resistive
6x103
NO 2)
TV8, 240VAC
25x103
NC
15A, 240VAC, General Purpose
100x103
NC
20A, 250VAC, Resistive (CO type only)
20x103
NC 30A LRA / 12A FLA, 250VAC, Definite Purpose 30x103
NC
1HP, 277VAC (CO type only)
50x103
CO
20A, 250VAC, Resistive
15x103
CO
20A /10A, 240VAC, Resistive
100x103
CO
30A / 15A Resistive, 250VAC
20x103
CO
30A FLA / 80A LRA (N.O.); 12A FLA, 30A LRA 30x103
(N.C.) 250VAC, Definite Purpose
CO
80A LRA / 10A FLA (N.O.); 33A LRA / 10A FLA 30x103
(N.C.) 250VAC, Definite Purpose
IEC 61810-1
Type Load
Cycles
NO 30A, 250VAC, Resistive, 85°C (PCB)
75x103
NO 20A, 250VAC, Resistive, 70°C (QC), 85°C (PCB) 100x103
NO 17A, 250VAC, Resistive, 105°C
100x103
NO 20A, 250VAC, Resistive, 85°C
100x103
NO
12A (12A), 250VAC, 60°C (per EN60730-1)
150x103
NC
10A, 250VAC, Resistive, 60°C (C.O. type only) 50x103
CO
20A, 250VAC, Resistive, 60°C (N.C.)
10x103
CO
20A/10A, 250VAC, Resistive, 60°C (N.O.)
50x103
CO
12A , 250VAC, Resistive, 85°C
100x103
1) Contact ratings at 40°C (unless otherwise noted) with relay properly vented.
Remove vent nib after soldering and cleaning.
2) Valid only for mounting and termination code 1.
Mechanical endurance
10x106 ops.
Coil Data
Coil voltage range
5 to 110VDC
Max. coil power
110% of nominal
Max. coil temperature
155°C
Coil insulation system according UL
Class F
Coil versions, DC coil
Coil
Rated
Operate Release
Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
5
5
3.75 0.5
28
900
9
9
6.75 0.9
90 900
12 12 9
1.2 160 900
15
15
11.25
1.5
249 900
18
18
13.5 1.8
360 900
22
22
16.5 2.2
538 900
24 24 18 2.4 640 900
48
48
36
4.8
2,560
900
110 110 82.5 11 13,444 900
A ll figures are given for coil without preenergization, at ambient temperature +23°C.
07-2018, Rev. 0718
www.te.com
© 2017 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1



TE T9GS1L14-48
General Purpose Relays
Power Relays
T9G series, DC coil 30A PCB Relay (Continued)
Potter & Brumfield
Coil Data (continued)
PCB layout
Bottom view on pins
T9G - Mounti ng and termin ation code 1
Only necessary term inals are
pCbreoenus senennqteuoceennsstsliyan,rgysleofomtrhers oihnwogllmeesothwdreoilllws.
mod els.
2
07-2018, Rev. 0718
Datasheets and product specification
www.te.com
according to IEC 61810-1 and to be used
© 2017 Tyco Electronics Corporation,
only together with the ‘Definitions’ section.
a TE Connectivity Ltd. company
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Initial surge withstand voltage
1500Vrms
4000Vrms
between contact and coil
8kV
Initial insulation resistance
between insulated elements 1x109Ω, 500VDC
Clearance/creepage
between contact and coil
6.4mm / 9.5mm (UL),
8mm / 8mm (IEC)
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
DC coil
Storage -55°C to +130°C
Operating -40 to + 1 05°C at reduced current
Category of environmental protection
IEC 61810
RTII - flux proof
RTIII - wash tight
Vibration resistance (functional)
Opening NO contact >10g
Opening NC contact >7g
Shock resistance (functional)
10g for 11msec
Shock resistance (destructive)
100g
Terminal type pcb-tht and pcb-tht + quick connect
Weight
18g mounting code 1
23g mounting code 2
Resistance to soldering heat THT
IEC 60068-2-20
250°C
Packaging/unit
10/tube, 420/box (PCB + QC), 500/box (PCB)
T9G - Mounting and termination code 2
Only necessary terminals are
present on single throw models.
Consequently, some holes will
be unnecessary for single throw
models.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.



TE T9GS1L14-48
Dimensions
Mounting and termination code 1
General Purpose Relays
Power Relays
T9G series, DC coil 30A PCB Relay (Continued)
Potter & Brumfield
Mounting and termination code 2
1 Form C (CO)
1 Form A (NO) 1 Form B (NC)
Product code structure
Typical product code
T9G S 5 L
Type
T9G Power PCB or panel mount relay T9G
Enclosure
S Wash-tight plastic case with knock off nib (requires mounting code 1 or 2)
V Flux-proof plastic case (requires mounting code 1 or 2)
Contact arrangement
1 1 form A (1 NO)
2 1 form B (1 NC)
5 1 form C (1 CO)
Coil Input
L DC voltage, 900mW
Mounting and termination
1 PCB mounting; PCB terminals for coil and contacts
2 PCB mounting; PCB term. for coil and contacts; 6.35mm (.250in) quick connect for contacts (only available with
enclosure code N, S or V)
2
4 -12
Contact material
4 AgSnO (RoHS compliant)
Coil voltage
Coil code: please refer to coil versions table
07-2018, Rev. 0718
www.te.com
© 2017 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
3







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)