Mount Fuses. 885 Datasheet

885 Fuses. Datasheet pdf. Equivalent


Littelfuse 885
885 Series Fuse
Surface Mount Fuses
NANO> 500 VDC Rated Fuse > 885 Series
Pb
RoHS
Agency Approvals
AGENCY AGENCY FILE NUMBER
E10480
R50395911
AMPERE RANGE
1A–5A
1A–5A
Electrical Characteristics for Series
% of Ampere
Rating
125%
200%
1000%
Opening Time
1 hour, Minimum
2 minutes, Maximum
1 second, Maximum
Description
The 885 NanoSurface Mount Fuses are high voltage
rated fuses with high interrupting current ratings at
450VDC/500VDC and 350VAC. It complies with
IEC 60127-7 Standard.
Features
• Heat resistant plastic
housing, UL 94 V-0
• Meets Littelfuse's
Automotive
qualifications*
• High pulse resistance
• Lead-free -- compatible
with lead-free solders
and higher temperature
profiles
• Low voltage drop
• Available in ratings of 1A
• Internationally approved
to 5A
* Largely based on Littelfuse internal AECQ-200 test plan
Applications
• Automotive
Additional Information
Datasheet
Resources
Samples
Electrical Specifications by Item
Ampere
Rating
(A)
1.00
Amp
Code
001.
Max
Voltage
Rating
(V)
Interrupting
Rating
Nominal Cold
Resistance
(Ohms) 1
Nominal
Melting
I2t (A2sec)
0.0780
0.80
1.25 1.25
1.60 01.6
2.00 002.
1500A @ 350VDC
0.0630
100A @ 500VDC
100A @ 350VAC
0.0473
500
0.0322
1.25
2.30
4.70
2.50 02.5
3.15 3.15
1500A @ 125VDC
100A @ 500VDC
100A @ 350VAC
0.0267
0.0196
6.90
13.35
4.00 004.
5.00 005.
1500A @ 125VDC
450 100A @ 450VDC
100A @ 350VAC
0.0152
0.0119
21.30
35.00
Notes:
1. Cold resistance measured at less than 10% of rated current at 23°C.
2. l2t values slated for 10xIn opening time
3. If you have special electrical characteristic needs, please contact Littelfuse to discuss application specific options.
Nominal Nom Power
Voltage Drop Dissipation
(mV)
(mW)
105 105
105 131
98 157
91 182
88 220
79 249
79 316
79 395
Agency Approvals
XX
XX
XX
XX
XX
XX
XX
XX
© 2018 Littelfuse, Inc.
Application testing is strongly recommended. Specifications are subject to change without notice.
Revised: 02/05/18


885 Datasheet
Recommendation 885 Datasheet
Part 885
Description Surface Mount Fuses
Feature 885; 885 Series Fuse Surface Mount Fuses NANO2® > 500 VDC Rated Fuse > 885 Series Pb RoHS Agency Appro.
Manufacture Littelfuse
Datasheet
Download 885 Datasheet




Littelfuse 885
Surface Mount Fuses
NANO> 500 VDC Rated Fuse > 885 Series
Temperature Re-rating Curve
Average Time Current Curves
Note:
1. Rerating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
1000
100
10
1
0.1
0.01
0.001
0.1
1 10 100
Current in Amperes (A)
1000
Soldering Parameters
Reflow Condition
Pb – Free assembly
- Temperature Min (Ts(min))
Pre Heat - Temperature Max (Ts(max))
- Time (Min to Max) (ts)
Average ramp up rate (LiquidusTemp
(TL) to peak
TS(max) to TL - Ramp-up Rate
Reflow
-Temperature (TL) (Liquidus)
- Temperature (tL)
Peak Temperature (TP)
Time within 5°C of actual peak
Temperature (tp)
Ramp-down Rate
Time 25°C to peakTemperature (TP)
Do not exceed
150°C
200°C
60 – 120 secs
5°C/second max.
5°C/second max.
217°C
60 – 90 seconds
260+0/–5 °C
20 – 40 seconds
5°C/second max.
8 minutes max.
260°C
Wave Soldering Parameters
260°C Peak
Temperature,
3 seconds max.
TP
TL
TS(max)
Ramp-up
TS(min)
25
Preheat
tS
time to peak temperature
(t 25ºC to peak)
tP
Critical Zone
TL to TP
tL
Ramp-down
Time
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/05/18



Littelfuse 885
Surface Mount Fuses
NANO> 500 VDC Rated Fuse > 885 Series
Product Characteristics
Materials
Product Marking
Solderability
Resistance to
Soldering Heat
Body: Plastic UL 94 V-0
Cap: Tin Plated Brass
Body: Brand Logo, Current Rating,
Voltage Rating, Series, Date Code
JESD22-B102E Method 1
MIL-STD-202 Method 210
Test Condition K
Dimensions
2.8±0.1mm
2.8±0.1mm
LF 885 F0417
1A 500V
10.86±0.23mm
4.78±0.1
Recommended Pad Layout
5.6+.05/-0
4.9+.05/-0
5.6+.05/-0
Operating Temperature –40°C to +85°C with proper derating
Climatic Category
IEC60068-1, -2-1, -2-2, -2-78
(–40°C to +85°C/21 days)
Vibration
MIL-STD-202 Method 201 and 204
Moisture
Sensitivity Level
J-STD-020, Level 1
Part Numbering System
0885 001 D R
SERIES
AMP Code
Refer to Electrical
characteristics table
QUANTITY Code
D = 1500 pcs
PACKAGING Code
R = Tape and Reel
Packaging
Thickness of the layer: Cu 35μm±1,8μm
Packaging Option
Tape and Reel
Packaging Specification
EIA-481-D
Quantity
1500
Quantity &
Packaging Code
D
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the
suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used
in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/05/18







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)