Low Power 48kHz Digital Audio Receiver
ASAHI KASEI
[AK4116]
AK4116
Low Power 48kHz Digital Audio Receiver
GENERAL DESCRIPTION The AK4116 is a low power S/PDI...
Description
ASAHI KASEI
[AK4116]
AK4116
Low Power 48kHz Digital Audio Receiver
GENERAL DESCRIPTION The AK4116 is a low power S/PDIF AES/EBU receiver supporting resolution up to 24-bit. The integrated channel status decoder supports both consumer and professional modes. The AK4116 can automatically detect a Non-PCM bit stream. Combining the AK4116 with a multi-channel codec such as AKM’s AK4527B or AK4529 can create a complete AC-3 system. Mode settings can be controlled via microprocessor serial interface. The small 20pin QFN package saves board space.
*AC-3 is a trademark of Dolby Laboratories.
FEATURES AES3, IEC60958, S/PDIF, EIAJ CP1201 Compatible Low jitter Analog PLL PLL Lock Range : 32kHz to 48kHz Clock Source: PLL or X'tal Auxiliary digital input Detection Functions
- Non-PCM Bit Stream Detection - DTS-CD Bit Stream Detection - Sampling Frequency Detection (32kHz, 44.1kHz, 48kHz) - Unlock & Parity Error Detection - Validity Flag Detection Up to 24bit Audio Data Format Audio I/F: Left justified, Right justified (16bit, 18bit, 20bit, 24bit), I2S 40-bit Channel Status Buffer Burst Preamble bit Pc and Pd Buffer for Non-PCM bit stream Q-subcode Buffer for CD bit stream 4-wire Serial µP I/F Master Clock Output: 256fs Operating Voltage: 2.7 to 3.6V Power Supply Current: 7mA (PLL mode)
2mA (X’tal mode) Small Package: 20pin QFN Ta: -40 to 85°C
MS0156-E-03
-1-
2005/08
ASAHI KASEI Block Diagram
RX0
DVDD DVSS
AVSS AVDD R
Clock Recovery
XTI XTO
X'tal...
Similar Datasheet