USB Transceiver
[ASAHI KASEI]
[AK4170]
AK4170
Features
n Ultra smooth output waveform n Support full speed(12Mbps) and low speed(1.5Mb...
Description
[ASAHI KASEI]
[AK4170]
AK4170
Features
n Ultra smooth output waveform n Support full speed(12Mbps) and low speed(1.5Mbps) n Single Power Supply 3.3 volts ± 10% n 16pin TSSOP package n Functionally compatible to Philips PDIUSBP11 n Support suspend mode
USB Transceiver
nPin Layout
OEN FAST
INP
INN
RDIFF SUS
RSHP
RSHN
+ -
VDD
VSS
AK4170 Block Diagram
DP DN
NC 1 OEN 2 RDIFF 3 RSHP 4 RSHN 5 SUS 6 VSS 7
NC 8
16 VDD 15 INN 14 INP 13 DP 12 DN 11 FAST 10 NC
9 NC
-1-
<1999/09>
[ASAHI KASEI]
[AK4170]
Pin/Function
No. Signal Name 1 NC 2 OEN
3 RDIFF
4 RSHP
5 RSHN
6 SUS
7 VSS 8 NC 9 NC 10 NC 11 FAST
12 DN
13 DP
14 INP
15 INN
16 VDD
I/O Description
- Not Connected I Output Enable Pin (CMOS level digital input)
Low input enables transmit data, it is that both INP and INN output onto DP and DN pins. High input enable receive mode, which disables the outputs of DP and DN, and the buffer goes into high-z state. O Differential Receiver Output (CMOS level digital output) When DP > DN, the output is H. When DP < DN, the output is L. When both DP and DN are L, the output is not guaranteed. this pin also outputs correctly regardless of the OEN input. O Schmitt Hysteresis Receiver Output for DP (D+) input (CMOS level digital output) When DP is high level, RSHP is high. When DP is low level, RSHP is low this pin also outputs correctly regardless of the OEN input. O Schmitt Hysteresis Receiver Output for DN (D-) input (CMOS level digital output) When DN is high le...
Similar Datasheet