Single/Multi-Channel DC Power/Energy Monitor
PAC1931/2/3/4
Single/Multi-Channel DC Power/Energy Monitor
with Accumulator
Features
• High-Side Current Monitor with ...
Description
PAC1931/2/3/4
Single/Multi-Channel DC Power/Energy Monitor
with Accumulator
Features
High-Side Current Monitor with One, Two, Three or Four Channels
- 100 mV full-scale range for current sense voltage,16-bit resolution
- Selectable bidirectional current sense capability, -100 mV to +100 mV range, 16-bit two’s complement (signed) data format
- External sense resistor sets full scale current range
- Very low input current simplifies routing
Wide Bus Voltage Range for Voltage Monitor
- 0V to 32V input common-mode voltage
- 16-bit resolution for voltage measurements; 14 bits are used for power calculations
Real Time Auto-Calibration of Offset and Gain Errors for Voltage and Current, No User Adjustment Required
1% Power Measurement Accuracy over a Wide Dynamic Range
On-Chip Accumulation of 28-bit Power Results for Energy Measurement
- 48-bit power accumulator register for recording accumulated power data
- 24-bit Accumulator Count
- User programmable sampling rates of 8, 64, 256 and 1024 samples per second
- 17 minutes of power data accumulation minimum at 1024 S/s
- Over 36 hours of power data accumulation minimum at 8 S/s
2.7V to 5.5V Supply Operation
- Separate VDD I/O pin for digital I/O - 1.62-5.5V capable SMBus and digital I/O - SMBus 3.0 and I2C Fast Mode Plus (1 Mb/S)
SMBus Address – 16 Options, set with Resistor
No Input Filters Required
ALERT Features that can be Enabled:
- ALERT on accumulator overflow
- ALERT on Conversion Complete
4 × 4 × 0.5 mm ...
Similar Datasheet