ISL95810

DATASHEET ISL95810 Single Digitally Controlled Potentiometer (XDCP™) Low Noise, Low Power I2C Bus, 256 Taps FN8090 Rev.3.01 Jun 5, 2020 The ISL95810 integrates a digitally controlled potentiometer (XDCP) on a monolithic CMOS integrated circuit. The digitally controlled potentiometer is implemented with a combination of resistor elements and CMOS switches. The position of the wiper is controlled by you through the I2C bus interface. The potentiometer has an associated volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR) that can be directly written to and read. The content of the WR controls the position of the wiper. At power-up, the device recalls the contents of the DCP’s IVR to the WR. The DCP can be used as a 3-terminal potentiometer or as a 2-terminal variable resistor in a wide variety of applications including control, parameter adjustments, and signal processing. Related Literature For a full list of related documents, visit our website: ISL95810 device page Features 256 resistor taps - 0.4% resolution I2C serial interface Wiper resistance: 70Ω typical at 3.3V Non-volatile storage of wiper position Standby current 5µA max Power supply: 2.7V to 5.5V 50kΩ, 10kΩ total resistance High reliability - Endurance: 200,000 data changes per bit per register - Register data retention: 50 years at T  +75°C 8 Ld MSOP and 8 Ld TDFN packaging Pb-free plus anneal available (RoHS compliant) VCC RH SDA WIPER REGISTER SCL I2C AND ...