Autocalibrating/ 4-Channel/ 12-Bit ANALOG-TO-DIGITAL CONVERTER
®
ADS7803
Autocalibrating, 4-Channel, 12-Bit ANALOG-TO-DIGITAL CONVERTER
FEATURES
q LOW POWER: 10mW plus Power Down q ...
Description
®
ADS7803
Autocalibrating, 4-Channel, 12-Bit ANALOG-TO-DIGITAL CONVERTER
FEATURES
q LOW POWER: 10mW plus Power Down q SIGNAL-TO-(NOISE + DISTORTION) RATIO OVER TEMPERATURE: 69dB min with fIN = 1kHz 66dB min with fIN = 50kHz q FAST CONVERSION TIME: 8.5µs Including Acquisition (117kHz Sampling Rate) q DC PERFORMANCE OVER TEMPERATURE: ±3/4 LSB max Total Error ±1/4 LSB max Channel Mismatch q FOUR-CHANNEL INPUT MULTIPLEXER q SINGLE SUPPLY: +5V q PIN COMPATIBLE WITH ADC7802
DESCRIPTION
The ADS7803 is a monolithic CMOS 12-bit analogto-digital converter with internal sample/hold and fourchannel multiplexer. It is designed and tested for full dynamic performance with input signals to 50kHz. An autocalibration cycle guarantees a total unadjusted error within ±3/4LSB over the specified temperature range, eliminating the need for offset or gain adjustment. The 5V single-supply requirements and standard CS, RD, and WR control signals make the part easy to use in microprocessor applications. Conversion results are available in two bytes through an 8-bit three-state output bus. The ADS7803 is available in a 28-pin plastic DIP and 28-lead PLCC, fully specified for operation over the industrial –40°C to +85°C temperature range.
A0 A1
Address Latch and Decoder
Calibration Microcontroller and Memory
Clock Control Logic
CS RD WR SFR
AIN0 AIN1 AIN2 AIN3
Analog Multiplexer
Capacitor Array Sampling ADC
Three-State Input/Output
BUSY 8-Bit Data Bus
VREF+
VREF–
International Airport In...
Similar Datasheet