Bead Inductors. BKP0603HM220-T Datasheet

BKP0603HM220-T Inductors. Datasheet pdf. Equivalent

BKP0603HM220-T Datasheet
Recommendation BKP0603HM220-T Datasheet
Part BKP0603HM220-T
Description Multilayer Chip Bead Inductors
Feature BKP0603HM220-T; Spec Sheet Multilayer Chip Bead Inductors for Power Lines (BK series P type) BKP0603HM220-T Features.
Manufacture TAIYO YUDEN
Download BKP0603HM220-T Datasheet

Spec Sheet
Multilayer Chip Bead Inductors for Power Lines (BK series P type)
Item Summary
22Ω, 1 A, 0201/0603 (EIA/JIS)
Lifecycle Stage
Mass Production
Standard packaging quantity (minimum)
Taping paper 15000pcs
Products characteristics table
Z Measuring Frequency
Case Size (EIA/JIS)
Rated Current (max)
DC Resistance (max)
Operating Temp. Range
RoHS Compliance (10 subst.)
REACH Compliance (191 subst.)
Halogen Free
22 Ω ± 25 %
100 MHz
70 mΩ
-55 to +85 ℃
External Dimensions
Dimension L
0.6 ±0.03 mm
Dimension W
0.3 ±0.03 mm
Dimension T
0.3 ±0.03 mm
Dimension e
0.15 ±0.05 mm
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.
Powered by TCPDF (

Notice for TAIYO YUDEN Products
Please read this notice before using the TAIYO YUDEN products.
Please conduct validation and verification of our products in actual condition of mounting and operating environment before using our
The product listed in this spec sheet is intended for use in general electronic equipment (e.g., AV equipment, OA equipment, home electric
appliances, office equipment, information and communication equipment including, without limitation, mobile phone, and PC) and medical
equipment classified as Class I or II by IMDRF. Please be sure to contact TAIYO YUDEN for further information before using the products for any
equipment which may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment, disaster prevention equipment,
medical equipment classified as Class III by IMDRF, highly public information network equipment including, without limitation, telephone
exchange, and base station).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g., aerospace equipment,
aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control equipment, undersea equipment, military
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g., in-flight
entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN. Please be sure to
contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic equipment, it is strongly
recommended to perform a thorough safety evaluation prior to use of our products and to install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way responsible for any damages
incurred by you or third parties arising from use of the product listed in this spec sheet for any equipment requiring inquiry to TAIYO YUDEN or
prohibited for use by TAIYO YUDEN as described above.
Information contained in this spec sheet is intended to convey examples of typical performances and/or applications of our products and is not
intended to make any warranty with respect to the intellectual property rights or any other related rights of TAIYO YUDEN or any third parties
nor grant any license under such rights.
Please note that the scope of warranty for our products is limited to the delivered our products themselves and TAIYO YUDEN shall not be in
any way responsible for any damages resulting from a fault or defect in our products. Notwithstanding the foregoing, if there is a written
agreement (e.g., supply and purchase agreement, quality assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will
warrant our products in accordance with such agreement.
The contents of this spec sheet are applicable to our products which are purchased from our sales offices or authorized distributors
(hereinafter “TAIYO YUDEN’s official sales channel”). Please note that the contents of this spec sheet are not applicable to our products
purchased from any seller other than TAIYO YUDEN’s official sales channel.
Caution for Export
The product listed in this spec sheet may require specific procedures for export according to “U.S. Export Administration Regulations”, “Foreign
Exchange and Foreign Trade Control Law” of Japan, and other applicable regulations. Should you have any questions on this matter, please
contact our sales staff.

@ 2014 :: :: Semiconductors datasheet search & download site (Privacy Policy & Contact)