16-bit bus transceiver
74ABT162245A; 74ABTH162245A
16-bit bus transceiver with 30 Ω series termination resistors;
3-state
Rev. 5 — 2 July 20...
Description
74ABT162245A; 74ABTH162245A
16-bit bus transceiver with 30 Ω series termination resistors;
3-state
Rev. 5 — 2 July 2021
Product data sheet
1. General description
The 74ABT162245A; 74ABTH162245A is a 16-bit transceiver with 30 Ω termination resistors and 3-state outputs. The device can be used as two 8-bit transceivers or one 16-bit transceiver. The device features two output enables (1OE and 2OE) each controlling eight outputs, and two send/receive (1DIR and 2DIR) inputs for direction control. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.
Two options are available, 74ABT162245A which does not have the bus hold feature and the 74ABTH162245A which incorporates the bus hold feature.
2. Features and benefits
16-bit bidirectional bus interface Multiple VCC and GND pins minimize switching noise 3-state buffers Output capability: +12 mA/–32 mA 74ABTH162245A incorporates bus-hold data inputs which eliminate the need for external
pull-up resistors to hold unused inputs Integrated 30 Ω termination resistors Supply voltage range from 4.5 to 5.5 V BiCMOS high speed and output drive Direct interface with TTL levels Power-up 3-state IOFF circuitry provides partial Power-down mode operation Latch-up performance exceeds 500 m...
Similar Datasheet