DatasheetsPDF.com

Inductors. VLS2012E-CA Datasheet

DatasheetsPDF.com

Inductors. VLS2012E-CA Datasheet






VLS2012E-CA Inductors. Datasheet pdf. Equivalent




VLS2012E-CA Inductors. Datasheet pdf. Equivalent





Part

VLS2012E-CA

Description

Inductors



Feature


INDUCTORS October 2017 Inductors for pow er circuits Wound ferrite VLS-E-CA seri es (For automobiles) VLS2012E-CA type V LS2012E-CA Caution INDUCTORS REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDE RS Please pay sufficient attention to t he warnings for safe designing when usi ng these products..
Manufacture

TDK

Datasheet
Download VLS2012E-CA Datasheet


TDK VLS2012E-CA

VLS2012E-CA; (2/9) REMINDERS The storage period i s less than 12 months. Be sure to follo w the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or l ess). If the storage period elapses, th e soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions s uch as gas corrosion (salt, acid, alkal i, etc.). Before so.


TDK VLS2012E-CA

ldering, be sure to preheat components. The preheating temperature should be se t so that the temperature difference be tween the solder temperature and chip t emperature does not exceed 150°C. Sold ering corrections after mounting should be within the range of .


TDK VLS2012E-CA

.

Part

VLS2012E-CA

Description

Inductors



Feature


INDUCTORS October 2017 Inductors for pow er circuits Wound ferrite VLS-E-CA seri es (For automobiles) VLS2012E-CA type V LS2012E-CA Caution INDUCTORS REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDE RS Please pay sufficient attention to t he warnings for safe designing when usi ng these products..
Manufacture

TDK

Datasheet
Download VLS2012E-CA Datasheet




 VLS2012E-CA
INDUCTORS
October 2017
Inductors for power circuits
Wound ferrite
VLS-E-CA series (For automobiles)
VLS2012E-CA type
VLS2012E-CA
Caution




 VLS2012E-CA
INDUCTORS
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
(2/9)
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20171026 / inductor_automotive_power_vls2012e-ca_en.fm




 VLS2012E-CA
INDUCTORS
Inductors for power circuits
Wound ferrite
(3/9)
Product compatible with RoHS directive
Halogen-free
Overview of VLS2012E-CA type
FEATURES
Magnetic shield type wound inductor for power circuits.
Low-profile product.
High magnetic shield construction and compatible with high-density mounting.
APPLICATION
Car navigation, car stereo and car accessories only
Not available for use related to driving, curving, stopping, and the other safety.
PART NUMBER CONSTRUCTION
VLS 2012
E
T - R47
Series name
L×W×H Dimensions
(mm)
2012 2.0×2.0×1.2
internal code
Packaging style
T Taping
Inductance
(µH)
R47 0.47
2R2 2.2
100 10
N - CA
Inductance
tolerance
M ±20%
N ±30%
Internal code
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity Individual weight
Type
Operating
temperature
Storage
temperature
°C °C (pieces/reel)
VLS2012E-CA
–40 to +105
–40 to +105
2000
Operating temperature range includes self-temperature rise.
The Storage temperature range is for after the circuit board is mounted.
mg
17
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20171026 / inductor_automotive_power_vls2012e-ca_en.fm



Recommended third-party VLS2012E-CA Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)