Inductors
INDUCTORS
October 2017
Inductors for power circuits
Wound ferrite
VLS-E-CA series (For automobiles)
VLS252015E-CA type
V...
Description
INDUCTORS
October 2017
Inductors for power circuits
Wound ferrite
VLS-E-CA series (For automobiles)
VLS252015E-CA type
VLS252015E-CA
Caution
INDUCTORS
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
(2/9)
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C.
Soldering corrections after mounting should be within the range...
Similar Datasheet