Optical Timing Clock
RFM products are now Murata products.
OP4010B
• Quartz SAW Stabilized and Filtered “Diff Sine” Technology
2>
• Fundam...
Description
RFM products are now Murata products.
OP4010B
Quartz SAW Stabilized and Filtered “Diff Sine” Technology
2>
Fundamental-Mode Oscillation at 663.552 MHz
Voltage Tunable for Phase Lock Loop Operations
Optical Timing Reference for Forward Error Correction Applications
Complies with Directive 2002/95/EC (RoHS)
The output of this device is generated and filtered by narrowband quartz SAW elements at 663.552 MHz. The
configuration of this clock is intended to provide a pure signal for optical timing applications in noisy signal
environments. The Q/Qbar differential output swing of ±1 volt about 0 Vdc has symmetry better than ±1% into
loads from 40 to 70 ohms; determined by customer application. The long term frequency accuracy is set by
an external reference source allowing this device to complete a Phase Lock Loop design without the usual
noise and jitter problems associated with PLL’s.
663.552 MHz Optical
Timing Clock
Absolute Maximum Ratings
Rating...
Similar Datasheet