Quad Digitally Controlled Potentiometer
NOT RECOMMENDED FOR NEW DESIGNS
DATASHEET
RECOMMENDED REPLACEMENT PART
ISL22446
ISL22424
FN6181
Quad Digitally Con...
Description
NOT RECOMMENDED FOR NEW DESIGNS
DATASHEET
RECOMMENDED REPLACEMENT PART
ISL22446
ISL22424
FN6181
Quad Digitally Controlled Potentiometer (XDCP™) Low Noise, Low Power, SPI™
Rev 2.00
Bus, 128 Taps
September 9, 2009
The ISL22446 integrates four digitally controlled potentiometers (DCP) and non-volatile memory on a monolithic CMOS integrated circuit.
The digitally controlled potentiometers are implemented with a combination of resistor elements and CMOS switches. The position of the wipers are controlled by the user through the SPI serial interface. Each potentiometer has an associated volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR) that can be directly written to and read by the user. The contents of the WR controls the position of the wiper. At power-up the device recalls the contents of the DCP’s IVR to the corresponding WR.
The DCPs can be used as three-terminal potentiometers or as two-terminal variable resistors in a wide variety of applica...
Similar Datasheet